Lexmark Z42 User's Guide for Windows NT and Windows 2000 (4.0 MB)
Lexmark Z42 Manual
View all Lexmark Z42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark Z42 manual content summary:
- Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 1
to products, programs, or services do not imply that Color Jetprinter is a trademark of Lexmark International, Inc. Other trademarks are the property of their respective owners. © Copyright 2000 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 2
Just click an index entry and go to the information source. Lexmark Z42 Color Jetprinter ™ User's Guide for Windows NT 4.0 and Windows 2000 Use this guide when you have questions about your printer or when you encounter a problem. Tips for using this guide • Use the buttons on the left side of the - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 3
Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Steps to basic printing Basic printing is as easy as: Step 1: Load the paper Step 2: Customize the printer driver Step 3: Print your document 3 - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 4
the paper against the right side of the sheet feeder, with the print side facing you. Note: Make sure you do not force the paper into the sheet feeder when you load it. For example, letter or A4 size paper should extend above the top of the paper support. Paper support Sheet feeder Troubleshooting - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 5
Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Steps to basic printing 2 Squeeze the release tab and the paper guide together and slide the paper guide to the edge of the paper. Paper guide Release tab 5 - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 6
Beyond the basics Maintaining your printer Troubleshooting Appendix Index Steps to basic printing Loading specialty media Follow these guidelines when loading specialty media: Load up to: Make sure: 10 envelopes • the print side is facing you. • envelopes are loaded vertically against - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 7
basics Maintaining your printer Troubleshooting Appendix Index Steps to basic printing Load up to: 10 greeting cards, index cards, or postcards Make sure: • the print side is facing you. • the cards are loaded vertically against the right side of the sheet feeder. • the paper guide is against - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 8
Beyond the basics Maintaining your printer Troubleshooting Appendix Index Steps to basic printing Load up to: 100 sheets of custom size paper Make sure: • the print side is facing you. • your paper size fits within these dimensions: - Width: 76 mm to 216 mm 3.0 in. to 8.5 in. - Length: 127 - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 9
your printer Troubleshooting Appendix Index Steps to basic printing Load up to: 20 sheets of banner paper Make sure: • you place the banner paper behind the printer, and then bring the unattached edge of the first page over the top of the printer and into the sheet feeder. • the paper guide is - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 10
your printer Troubleshooting Steps to basic printing Step 2: Customize the printer driver Your printer software includes several applications that let you perform printing tasks with superior printing results. One of these applications is your printer driver. If you are using: • Windows NT - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 11
Beyond the basics Maintaining your printer Troubleshooting Appendix Index Steps to basic printing Opening the printer driver from an application When you open the printer driver from your application, you can change printer settings ONLY for the documents you are currently creating. 1 Open the - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 12
the page and select a binding edge • Choose the default settings • Perform print cartridge maintenance • Select Dry Time Delay • View the current printer settings Lexmark Z42 Series ColorFine Properties Page Setup Color Features Paper Size: Letter (8.5 x 11 in) Hot Spot Help Click this to create - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 13
Maintaining your printer Troubleshooting Appendix Index Steps to basic printing Selecting settings for specialty media When your printer software was installed, the printer driver was set to the default settings. Use the default settings for printing most documents on plain paper. However, you - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 14
Beyond the basics Maintaining your printer Troubleshooting Appendix Index Steps to basic printing When you are printing on this specialty media: Sheets of custom size paper Banner paper Transparencies From the Page Setup tab, make these selections: Click the Custom Paper Size button. Enter the - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 15
printing Beyond the basics Maintaining your printer Troubleshooting Appendix Steps to basic printing When you are printing on this specialty media: Iron-on transfers From the Page Setup tab, make these selections: From the Media Type drop-down menu, select Iron On Transfer. Note: Many software - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 16
Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Beyond the basics You can use your printer for: Printing photos Printing on both sides of a sheet of paper 16 - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 17
photos You can print quality photos with the black and color cartridge combination that came with your printer. However, for the best possible photo quality, replace the black cartridge with a photo cartridge. For help replacing the black cartridge, see page 29. Step 1: Load the photo paper Place up - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 18
your printer Troubleshooting Appendix Index Beyond the basics Step 2: Customize the printer software for printing photos 1 Open the printer driver. For help, see page 18. 2 Adjust the Document Color settings: a Click the Color tab. b Select Natural Color. Lexmark Z42 Series ColorFine - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 19
Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Beyond the basics 3 Customize the settings for printing photos: a Click the Page Setup tab. Lexmark Z42 Series ColorFine Properties Page Setup Color Features Letter (8.5 x 11 in) b Select the Paper Size. c Select - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 20
Beyond the basics Maintaining your printer Troubleshooting Appendix Index Beyond the basics Step 3: Print your photos Note: For the best possible photo quality, print with a photo and color cartridge combination in your printer. Use a photo cartridge, Lexmark part number 12A1990. To replace - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 21
printer Troubleshooting Appendix Beyond the basics Printing on both sides of a sheet of paper Your Lexmark printer lets you print on both sides of a sheet of paper. Besides saving paper, this feature is helpful when you want to print tablets. Step 1: Load the paper Load up to 100 sheets of paper - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 22
Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Beyond the basics 3 Click the Features tab. Note: The orientation you select in step 2 is reflected in the graphics on the Features tab. - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 23
Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Beyond the basics 4 Select a binding edge option: a Click the Features tab. Lexmark Z42 Series ColorFine Properties Page Setup Color Features b From the Two-Sided Printing area, select Long Edge or Short - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 24
of your two-sided document are finished printing, your printer software prompts you to reload the paper. a When the entire stack is finished printing, remove the stack. b Flip the stack of paper. c Insert the stack of paper and instruction page with the printed side facing away from you and the - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 25
Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Beyond the basics 4 Click OK. The even-numbered pages print on the other side. 5 To return to single-sided printing when you have finished two- sided printing: a Select the Features tab. b From the Two - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 26
Beyond the basics Maintaining your printer Troubleshooting Appendix Index Maintaining your printer This section describes how to install, replace, and care for your print cartridges. You can use the Control Program, one of your printer's software programs, to help you with these tasks: Using - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 27
Program The Control Program allows you to monitor your printer, and install or replace print cartridges. To open the Control Program from Windows, from the Start menu, click: 1 Programs. 2 Lexmark Z42 Series ColorFine. 3 Control Program. Maintaining your printer Troubleshooting Appendix 27 Index - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 28
ink levels • Install or replace a print cartridge • Align the cartridges • Clean the print nozzles • Print a test page • View cartridge part numbers and order supplies directly from Lexmark's Web site About tab to find printer software version and copyright information Control Program - Lexmark Z42 - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 29
Beyond the basics Maintaining your printer Installing or replacing a print cartridge 1 Make sure the Power light is On. Power light On Paper Feed light Maintaining your printer Troubleshooting Appendix 2 Raise the front cover. The print cartridge carrier moves to the loading position unless - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 30
to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Maintaining your printer 3 Remove the old print cartridge. Store or dispose of the old cartridge. 4 Open the Control Program. For help, see page 27. 5 Click the Cartridge tab. 6 Click Change Cartridge. 30 - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 31
Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Maintaining your printer 7 The Change Cartridges dialog box displays. Follow the steps on your screen to install the cartridges. a To control the speed of the animation on your screen, click Stop. - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 32
printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Maintaining your printer 8 The Choose Cartridges window displays: a Select the cartridge(s) you installed in your printer. b If you installed a new cartridge(s), click the appropriate box to reset the ink levels - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 33
your printer Troubleshooting Appendix Index Maintaining your printer Improving print quality If print quality is not what you expect, align your print cartridges or clean your print nozzles. Aligning the print cartridges Normally, you only align the print cartridges after installing a new print - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 34
Troubleshooting Appendix Index Maintaining your printer 3 Click the Cartridge tab. 4 Click Align Cartridges. Your printer prints an alignment test page and the Align Cartridge dialog box displays. The test page looks similar to the one shown: Depending on the cartridge combination you installed - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 35
Beyond the basics Maintaining your printer Troubleshooting Appendix Index Maintaining your printer 6 In the Align Cartridges dialog box, enter the pattern numbers from the printed test page that come closest to forming a straight line. For example, in group A on page 34, pattern 16 came closest - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 36
Beyond the basics Maintaining your printer Troubleshooting Appendix Index Maintaining your printer Cleaning the print nozzles The print cartridge nozzle test helps you pinpoint any clogged nozzles. The nozzle test also cleans the print cartridge by forcing ink through the nozzles. A test line - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 37
Troubleshooting Appendix Index Maintaining your printer 4 Click Clean Print Nozzles. The printer feeds a sheet of paper and prints a nozzle test pattern, similar to the one shown: If any of these colors are missing on your printed test page, your cartridge may be out of that color of ink. Broken - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 38
Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Maintaining your printer 5 Compare the diagonal lines above the printed bars to the diagonal lines below the printed bars. Look for a break in the diagonal lines. A broken line indicates clogged - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 39
your printer Troubleshooting Appendix Maintaining your printer Wiping print nozzles and contacts If print quality does not improve after cleaning the print nozzles (see page 36), there may be dried ink on the print nozzles or contacts. 1 Remove the print cartridges from the printer. For - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 40
If a print cartridge runs out of ink, leave the empty cartridge in the printer until you are ready to replace it. Printing with one of the print cartridge carriers empty may cause printer problems. Lexmark's printer warranty does not cover repair of failures or damage caused by a refilled cartridge - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 41
Index Troubleshooting This section lists printer problems that can occur, and what you can do to solve them. From the list of printing problems below, select a category that describes your printing problem. Then read for the solution to your problem. Printer prints slowly or doesn't print Paper - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 42
, click the Options tab. 2 Make sure Enable Bidirectional Support is checked. For additional help, refer to the "Troubleshooting" section of your printer software Help files. Printer prints slowly or doesn't print If your printer doesn't print, your printer and your computer may not be able to - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 43
to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Troubleshooting Before proceeding, verify that: • The parallel or USB cable is securely attached to both the printer and the personal computer. • The printer is plugged in and turned On. • Your printer port - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 44
sure: • The print cartridges are installed correctly. For help, see page 29. • If you are using a parallel cable, make sure it is an IEEE 1284- compliant parallel cable that supports bidirectional printing. Printer ejects a blank page after appearing to print Make sure: • Your Lexmark printer is set - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 45
to print than regular text. • Check your computer's resources. Consider purchasing more memory or increasing the virtual memory for your computer. Paper misfeeds or jams Paper misfeeds or pulls multiple sheets while moving through the printer Make sure: • The paper is a recommended paper for inkjet - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 46
page 4. • If regular paper feeds without problems, load the envelopes vertically against the right side of the sheet feeder. Make sure the paper guide is against the side of the envelopes. • Make sure envelopes or the appropriate specialty papers are selected in the printer driver. • Make sure you - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 47
Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Troubleshooting Printer has a paper jam If the paper is lodged too far into the printer and can't be removed: 1 Press the Power button to turn the printer Off. 2 Pull firmly on the paper to remove it. - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 48
Maintaining your printer Troubleshooting Appendix Index Troubleshooting Vertical straight lines are not smooth To improve the print quality of vertical straight lines in tables, borders, and graphs: • Select a higher Print Quality setting. For help, see page 10. • Align the print cartridges. For - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 49
Index Troubleshooting Print quality is poor at the left, right, top, or bottom edge of page Like other printers, your printer cannot print in the extreme left, right, top, or bottom edges of a page. Use these minimum settings: • Left and Right margins: 6.35 mm (0.25 in.) each for all paper sizes - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 50
printer Troubleshooting Appendix Index Troubleshooting Colors on the printout differ from the colors on the screen • Select Natural Color as the Document Color: 1 From the printer driver, click the Color tab. 2 Make sure Natural Color is selected. • A print cartridge may be out of ink or low on ink - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 51
Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Troubleshooting Problems with transparencies, photos, or envelopes Glossy photo papers or transparencies stick together • Use a transparency or photo paper designed for use with an inkjet printer. • Let each page dry - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 52
your printer Troubleshooting Appendix Troubleshooting Error messages and flashing lights Paper Jam message For help, see page 47. Power Paper light Feed light Ink Low message A print cartridge is running out of ink. Purchase a new print cartridge. For help replacing the print cartridge, see - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 53
Steps to basic printing Beyond the basics Troubleshooting Power light Paper Feed light 1 2 The Power light blinks twice The print cartridge carrier has stalled. Check your screen for any error messages. Turn the printer Off. Wait a few seconds, and then turn the printer back On. Maintaining - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 54
-ROM Windows NT 4.0/Windows 2000 To install the printer software using the CD-ROM that came with your printer: 1 Start Windows. 2 Click Cancel on any screens that appear. 3 When the desktop appears, insert the software CD. The Lexmark Z42 software installation screen appears. 4 Click Install Printer - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 55
example, d:\setup), and then click OK. 2 When the Lexmark Z42 software installation screen appears, select Tools. 3 Select Create Diskettes. 4 Follow the instructions on the screen. To install the printer software from diskettes: 1 Start Windows. 2 Insert Setup Disk 1 into your disk drive. 3 From - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 56
printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Appendix Statement of Limited Warranty Lexmark that came with your printer. Lexmark Z42 Color Jetprinter TM This Statement of this statement to that user. Warranty Service The warranty period is 12 months and - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 57
authorized servicer • Operation of a product beyond the limit of its duty cycle • Failure to have installed a maintenance kit as specified (if applicable) • Use of printing media outside of Lexmark specifications • Use of other than Lexmark supplies (such as toner cartridges, inkjet cartridges, and - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 58
printing Beyond the basics Maintaining your printer Troubleshooting Appendix Appendix Limitation of Liability Your sole remedy under this Statement of Limited Warranty is set forth in this section. For any claim concerning performance or nonperformance of Lexmark The Lexmark Z42 Color Jetprinter - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 59
printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Appendix The FCC Class B limits are designed to provide reasonable protection against harmful interference in a residential installation purchase or service representative for cable such as Lexmark part number 1329605 - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 60
printing Beyond the basics Maintaining your printer Troubleshooting by the Director of Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France. This Power supply If your power supply fails, replace it with the Lexmark replacement part or other UL LISTED Direct Plug-In Power - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 61
your printer Troubleshooting Safety Information • If your product is NOT marked with this symbol , it MUST be connected to an electrical outlet that is properly grounded. • The power cord must be connected to an electrical outlet that is near the product and easily accessible. • Refer service or - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 62
50 Choose Cartridges window 32 color faded 50 missing 37 contacts, print wiping 39 Control Program opening 27 tabs 28 using 27 custom size paper loading 8 settings 14 customizing printer settings 10 D dark or smudged print 47 default settings 13 diskettes, installing printer software 55 Document - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 63
Ink Low message 52 installing printer software 54, 55 intermittent printing 48 iron-on transfers loading 7 settings 15 J Japanese VCCI Notice 60 L lights 29, 52, 53 loading paper 4 specialty papers 6 M margins minimum settings 49 messages, error Ink Low 52 Paper Jam 52 Printer Not Ready 43 Printer - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 64
wiping 39 print cartridges aligning 33 cleaning 36 installing 29 part numbers 28 black 32 color 32 photo 20 preserving 40 removing 30 replacing 29 Print Instruction Sheet 23 print nozzles cleaning 36 wiping 39 print quality improving 33 troubleshooting 47 printer driver downloading 54 installing 54 - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 65
Defaults (Printing Preferences) 10 installing 54 CD-ROM 54 diskettes 54 software, printer uninstalling 55 specialty papers loading 6 settings 13 supplies, ordering 28 T test page alignment 34 does not print 44 missing colors 37 transparencies loading 9 settings 14 troubleshooting error messages - Lexmark Z42 | User's Guide for Windows NT and Windows 2000 (4.0 MB) - Page 66
D E F G H I J K L M N O P Q R S T U V W X Y Z U unexpected characters 50 uninstalling printer software 55 United Kingdom Telecommunications Act 1984 60 USB cable specifications 59 W warranty 56 Windows 2000 Printing Preferences 10 opening 11 Windows NT 4.0 Document Defaults 10 opening 11 Index 66
Edition: January 2000
The following paragraph does not apply to any country where such provisions are inconsistent with local
law:
LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in later editions. Improvements or changes in the products or
the programs described may be made at any time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make
these available in all countries in which it operates. Any reference to a product, program, or service is not intended
to state or imply that only that product, program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and
verification of operation in conjunction with other products, programs, or services, except those expressly designated
by the manufacturer, are the user’s responsibility.
Lexmark, Lexmark with diamond design, and ColorFine are trademarks of Lexmark International, Inc., registered in
the United States and/or other countries. Color Jetprinter is a trademark of Lexmark International, Inc.
Other trademarks are the property of their respective owners.
© Copyright 2000 Lexmark International, Inc. All rights reserved.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and
Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.
Edition Notice