Lexmark Z45 Online User's Guide for Mac OS X 10.0.3 to 10.1 - Page 47
Printing a banner
View all Lexmark Z45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Lexmark Z45 Printer overview Basic printing Printing ideas Maintenance Troubleshooting Notices Index Using this Guide... Printing a banner Note: Some software applications and some operating systems do not support banner printing. Step 1: Load the banner paper Make sure your banner paper is not used or damaged. 1 Remove any paper from the paper support. 2 Tear off enough pages for the banner including one extra sheet, and then place them behind the printer. 3 Load the unattached leading edge of the first page into the printer, with the right side against the paper support. Note: Forcing the paper too far into the printer may cause a paper jam. For help, see Clearing paper misfeeds or jams. www.lexmark.com Printing ideas 47
47
Printing ideas
Printer overview
Basic printing
Printing ideas
Maintenance
Troubleshooting
Notices
Index
Lexmark Z45
Using this
Guide...
www.lexmark.com
Printing a banner
Note:
Some software applications and
some operating systems do not
support banner printing.
Step 1: Load the banner paper
Make sure your banner paper is not used or damaged.
1
Remove any paper from the paper support.
2
Tear off enough pages for the banner
including one extra sheet, and then place
them behind the printer.
3
Load the unattached leading edge of the first
page into the printer, with the right side
against the paper support.
Note:
Forcing the paper too far into the
printer may cause a paper jam.
For help, see
Clearing paper
misfeeds or jams
.