LiftMaster 3240 3240 Manual - Page 6
ASSEMBLY, Fasten the Rail to the Motor Unit - with 8 rail
View all LiftMaster 3240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY STEP 1 Fasten the Rail to the Motor Unit To avoid installation difficulties, do not run the garage door opener until instructed to do so. HARDWARE SHOWN ACTUAL SIZE To aid in assembly and installation, replace the foam packing around the motor unit. Remove it after Installation Step 4. • Working on a level surface, align the rail assembly with the motor unit, as shown. • Slip the coupling over the rail sprocket. • Slide the rail through the motor unit bracket until the coupling fits securely over the motor unit sprocket. • Align the two bolt holes in the rail with those in the motor unit bracket. Insert two 1/4"-20x7/16" hex bolts and lock nuts. Tighten securely with a 3/8" socket wrench. • Turn release arm down to disengage trolley. • Slide the trolley onto and along the bottom of the rail. Align trolley with rack and turn release arm up to re-engage trolley. Be certain to install it facing correctly: the trolley release arm must be horizontal (lock position). Hex Bolts 1/4"-20x7/16" Hex Bolt 1/4"-20x7/16" Motor Unit Bracket Motor Unit Sprocket Coupling Rail Sprocket Rail Assembly Foam Packaging Hex Bolts 1/4"-20x7/16" Release Arm Trolley 6 Rack To motor unit