LiftMaster CSL24VDC CSL24VDC Installation Manual - Page 3

TABLE OF CONTENTS SAFETY 1 SAFETY SYMBOL AND SIGNAL WORD REVIEW 1 USAGE CLASS 2 UL325 ENTRAPMENT PROTECTION REQUIREMENTS 2 SAFETY INSTALLATION INFORMATION 3 GATE CONSTRUCTION INFORMATION 4 INTRODUCTION 5 CARTON INVENTORY 5 OPERATOR SPECIFICATIONS 6 SITE PREPARATION 7 OVERVIEW OF TYPICAL INSTALLATION 8 INSTALLATION 9 IMPORTANT SAFETY INFORMATION 9 DETERMINE LOCATION FOR CONCRETE PAD AND OPERATOR...........9 CONCRETE PAD AND OPERATOR ATTACHMENT 10 ATTACH THE CHAIN 11 INSTALL ENTRAPMENT PROTECTION 12 EARTH GROUND ROD 13 POWER WIRING 14 AC POWER SWITCH 15 CONNECT BATTERIES 15 DUAL GATES ONLY 17 INSTALL THE COVER 19 ADJUSTMENT 20 LIMIT AND FORCE ADJUSTMENT 20 PROGRAMMING 22 REMOTE CONTROLS (NOT PROVIDED 22 LIFTMASTER INTERNET GATEWAY (NOT PROVIDED 23 ERASE ALL CODES 23 ERASE LIMITS 23 TO REMOVE AND ERASE MONITORED ENTRAPMENT PROTECTION DEVICES 23 OPERATION 24 GATE OPERATOR SETUP EXAMPLES 24 CONTROL BOARD OVERVIEW 25 RESET SWITCH 26 MANUAL DISCONNECT 26 OPERATOR ALARM 26 REMOTE CONTROL 26 ACCESSORY WIRING 27 EXTERNAL CONTROL DEVICES 27 VEHICLE DETECTION DEVICES 27 LOCKS 28 MISCELLANEOUS WIRING 28 EXPANSION BOARD 29 EXPANSION BOARD OVERVIEW 29 AUXILIARY RELAYS 30 WIRING ACCESSORIES TO THE EXPANSION BOARD 31 MAINTENANCE 32 IMPORTANT SAFETY INFORMATION 32 MAINTENANCE CHART 32 BATTERIES 32 DRIVE CHAIN 32 TROUBLESHOOTING 33 ERROR CODES 33 CONTROL BOARD LEDS 36 TROUBLESHOOTING CHART 37 APPENDIX 40 TYPES OF INSTALLATIONS 40 DETERMINE LOCATION FOR CONCRETE PAD AND OPERATOR.........41 ATTACH THE CHAIN 41 SOLAR PANEL(S 42 SAMS WIRING WITH RELAYS NOT ENERGIZED 46 DUAL GATE SETTINGS 46 LIMIT SETUP WITH A REMOTE CONTROL 47 WIRING DIAGRAM 48 REPAIR PARTS 49 ACCESSORIES 51 WARRANTY 53 SAFETY SAFETY SYMBOL AND SIGNAL WORD REVIEW When you see these Safety Symbols and Signal Words on the following pages, they will alert you to the possibility of Serious Injury or Death if you do not comply with the warnings that accompany them. The hazard may come from something mechanical or from electric shock. Read the warnings carefully. When you see this Signal Word on the following pages, it will alert you to the possibility of damage to your gate and/or the gate operator if you do not comply with the cautionary statements that accompany it. Read them carefully. IMPORTANT NOTE: • BEFORE attempting to install, operate or maintain the operator, you must read and fully understand this manual and follow all safety instructions. • DO NOT attempt repair or service of your gate operator unless you are an Authorized Service Technician. 1 MECHANICAL ELECTRICAL