LiftMaster Cards User Guide

LiftMaster Cards Manual

Get LiftMaster Cards PDF manuals and user guides View all LiftMaster Cards manuals
Add to My Manuals
Save this manual to your list of manuals

LiftMaster Cards manual content summary:

  • LiftMaster Cards | User Guide - Page 1
    button that will cancel any call or key sequence. Program Pre-Installed LiftMaster Receiver Step 1: Pry open the front panel of the receiver case with a coin or a screwdriver been programmed. Proceed to Initial Setup. Erase All Control Codes Press and hold the Learn button on the receiver until
  • LiftMaster Cards | User Guide - Page 2
    Master PIN Number on Keypad: ?? ?? 09 "BEEP" ### Enter new Master PIN Number: "BEEP" Adding PIN Numbers The WKP5LM3 can support up to 5 PIN Numbers while the WKP250LM3 can support 250. Enter Master PIN Number on Keypad: ? ? ?? 9 "BEEP" Enter new PIN Number: "BEEP" Erasing PIN Numbers Enter Master
  • LiftMaster Cards | User Guide - Page 3
    Mount Keypad It is recommended that Keypad be mounted to a Gooseneck post or non-metallic surface. If it is necessary to mount Keypad to a metal surface, use a non-metallic spacer to move the Keypad away from the metal surface. Step 1 Step 2 Mount the Keypad onto the back panel with screws.
  • LiftMaster Cards | User Guide - Page 4
    : 1-800-528-2806 www.liftmaster.com NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. Tested to Comply
  • 1
  • 2
  • 3
  • 4
1
2
3
4
5
6
7
8
9
*
0
#
C ncel
Carton Inventory
Overview
The Wireless Keypad uses a digitally secure intercom
link that allows it to control one access point. The
Wireless Keypad is compatible with various LiftMaster
Wireless Products.
Model WKP5LM3 can hold up to 5 PIN Numbers.
Model WKP250LM3 can hold up to 250 PIN Numbers.
Assembly
Install 4 AA Alkaline batteries (not provided). (Lithium
batteries recommended for colder environments.)
Keypad will beep.
Keypad will continuously beep indicating no Master
PIN Number has been programmed. Proceed to
Initial
Setup
.
1
Keypad
Models WKP5LM3 & WKP250LM3
Wireless Keypad
Initial Setup
Step 1:
On keypad press:
Step 2:
Enter 4 digit Master PIN Number.
Example: 1234.
#
#
#
?
?
?
?
Bolt (4)
Washer (4)
Nut (4)
Screw (4)
Allen Wrench
®
NOTE:
“ * “ is the cancel button that will cancel any
call or key sequence.
Program Pre-Installed LiftMaster Receiver
Step 1:
Pry open the front
panel of the receiver case
with a coin or a screwdriver.
Step 2:
Press and release
the Learn button on the
receiver. The Indicator Light
will light for 30 seconds
indicating that receiver is in
Learn Mode.
Step 3:
Within 30 seconds enter Master PIN Number
on Keypad.
Step 4:
Press “1”.
Erase All Control Codes
Press and hold the Learn button on the receiver until
the Indicator Light turns off indicating that the receiver
memory is clear (about 6 seconds).
Indicator Light
Learn Button