LiftMaster Cards User Guide - Page 1
LiftMaster Cards Manual
View all LiftMaster Cards manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Models WKP5LM3 & WKP250LM3 Wireless Keypad ® Overview The Wireless Keypad uses a digitally secure intercom link that allows it to control one access point. The Wireless Keypad is compatible with various LiftMaster Wireless Products. Model WKP5LM3 can hold up to 5 PIN Numbers. Model WKP250LM3 can hold up to 250 PIN Numbers. Carton Inventory 123 456 789 *C ncel 0 # Keypad Bolt (4) Washer (4) Nut (4) Screw (4) Allen Wrench Assembly Initial Setup Step 1: On keypad press: # # # Step 2: Enter 4 digit Master PIN Number. Example: 1234. ? ? ?? NOTE: " * " is the cancel button that will cancel any call or key sequence. Program Pre-Installed LiftMaster Receiver Step 1: Pry open the front panel of the receiver case with a coin or a screwdriver. Indicator Light Learn Button Step 2: Press and release the Learn button on the receiver. The Indicator Light will light for 30 seconds indicating that receiver is in Learn Mode. Step 3: Within 30 seconds enter Master PIN Number on Keypad. Step 4: Press "1". Install 4 AA Alkaline batteries (not provided). (Lithium batteries recommended for colder environments.) Keypad will beep. Keypad will continuously beep indicating no Master PIN Number has been programmed. Proceed to Initial Setup. Erase All Control Codes Press and hold the Learn button on the receiver until the Indicator Light turns off indicating that the receiver memory is clear (about 6 seconds). 1