LiftMaster IPACIPDCC IPACIPDCC Sell Sheet Manual - Page 2

Ipacipdcc

Page 2 highlights

Internet Protocol Door Controller IPACIPDCC Instantly manage all of your access points using the LiftMaster Cloud anytime from anywhere LiftMaster Cloud is a exible system with virtually unlimited expansion potential, unconstrained by geography. The intuitive browser-based interface is easy to learn, and there is no software to support and no servers or dedicated PCs to manage. LiftMaster Cloud • Cost-effective solution, each IPACIPDCC provides fully credentialed access control for two vehicular or pedestrian entrances • Property data for multiple devices can be managed using the LiftMaster Cloud so you can install as many IPACIPDCCs as you need • Easy to install in new or existing properties • Works with any standard Wiegand-compatible readers, receivers, and RFID readers • Uses Power over Ethernet (PoE) Ideal with: • Passport Credentialed Access Accessories designed to maximize radio range • Our Wired Keypad and Proximity Reader (KPR2000) used anywhere card and code access are used • Any standard Wiegand card reader only solution PRODUCT FEATURES Active Credentials Capacity Maximum number of gate/doors of control Event history Authentication and encryption Inputs Output relays Power Output Power Input Temperature and humidity range 2-Door Controller dimensions Compliance Warranty SPECIFICATIONS 25,000 per IPACIPDCC 2 6,000 events (FIFO) offline from host X.509 Digital Certificates and 128-bit SSL (2) Wiegand inputs (2) Door position inputs, (2) Request to exit inputs, (supervision optional for both inputs) (2) Non-latching wet or dry selectable, (2) Dry relay contacts are rated for 2A at 30VDC The IPACIPDCC is capable of supplying a total of 750mA to field devices This power may be shared between a reader and one or two additional field devices Recommended: Power is supplied using the Power over Ethernet technology available with PoE (802.3af) enabled network devices,13 Watts maximum Alternate: Supervised 12VDC linear power supply with battery backup and input surge protection, supplying at least 1.5A Note: Use of a UL 294 Access Control/Burglary power-limited power supply is required for all listed installations Operating Temp: 32°F to 125°F, (0°C to 49°C) Humidity: 5% to 95% relative, noncondensing Note: The Door Controller is intended for use in indoor environments only 3" W x 4.5" H x 1.25" D UL/ULC 294 Listed Component, FCC Part 15 Class A Compliant Two years 4.5" To learn more visit LiftMaster.com, contact your sales representative or call 800.323.2276. LiftMaster ©2016 LiftMaster All Rights Reserved 845 Larch Ave., Elmhurst, IL 60126 LiftMaster.com LMGTCAIPDC 3/16 3" 1.25"

  • 1
  • 2

Instantly manage all of your access points
using the LiftMaster Cloud anytime from anywhere
LiftMaster Cloud is a flexible system with virtually unlimited expansion potential,
unconstrained by geography. The intuitive browser-based interface is easy to learn,
and there is no software to support and no servers or dedicated PCs to manage.
Ideal with:
Passport Credentialed Access Accessories designed to
maximize radio range
Our Wired Keypad and Proximity Reader (KPR2000) used
anywhere card and code access are used
Any standard Wiegand card reader only solution
To learn more visit LiftMaster.com, contact your sales representative
or call 800.323.2276.
LiftMaster
©2016 LiftMaster All Rights Reserved
845 Larch Ave., Elmhurst, IL 60126
LiftMaster.com
LMGTCAIPDC 3/16
Internet Protocol Door Controller
Cost-effective solution, each IPACIPDCC provides fully credentialed access control
for two vehicular or pedestrian entrances
Property data for multiple devices can be managed using the LiftMaster Cloud so
you can install as many IPACIPDCCs as you need
Easy to install in new or existing properties
Works with any standard Wiegand-compatible readers, receivers, and RFID readers
Uses Power over Ethernet (PoE)
IPACIPDCC
Active Credentials Capacity
25,000 per IPACIPDCC
PRODUCT FEATURES
SPECIFICATIONS
Maximum number of gate/doors of control
2
Event history
6,000 events (FIFO) offline from host
Authentication and encryption
X.509 Digital Certificates and 128-bit SSL
Inputs
(2) Wiegand inputs (2) Door position inputs, (2) Request to exit inputs,
(supervision optional for both inputs)
Output relays
(2) Non-latching wet or dry selectable, (2) Dry relay contacts are rated for 2A at 30VDC
Power Output
The IPACIPDCC is capable of supplying a total of 750mA to field devices
This power may be shared between a reader and one or two additional field devices
Power Input
Recommended: Power is supplied using the Power over Ethernet technology available
with PoE (802.3af) enabled network devices,13 Watts maximum
Alternate: Supervised 12VDC linear power supply with battery backup and input surge
protection, supplying at least 1.5A
Note: Use of a UL 294 Access Control/Burglary power-limited power supply is required
for all listed installations
Temperature and humidity range
Operating Temp: 32°F to 125°F, (0°C to 49°C)
Humidity: 5% to 95% relative, noncondensing
Note: The Door Controller is intended for use in indoor environments only
2-Door Controller dimensions
3” W x 4.5” H x 1.25” D
Compliance
UL/ULC 294 Listed Component, FCC Part 15 Class A Compliant
4.5”
3”
1.25”
Warranty
Two years
LiftMaster
Cloud