LiftMaster LMSC1000 Instructions Manual - English French Spanish - Page 1
LiftMaster LMSC1000 Manual
View all LiftMaster LMSC1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
LiftMaster Vehicle RFID Tags LMHNTG Hang Tag and LMUNTG LiftMaster DualPurpose Vehicle RFID Tag (Windshield/Headlamp) UHF RFID Tag Mounting Instructions LiftMaster Proprietary RFID Tags must be used with LiftMaster RFID Long Range Reader (LMSC1000). The tags are high performance radio frequency identification devices. They have been designed to be installed on the interior (LMHNTG/SPLMHNTG LiftMaster RFID Hang Tag and LMUNTG/ SPLMUNTG LiftMaster Dual-Purpose RFID Tag [Windshield/Headlamp]) or exterior of the vehicle (LMUNTG/SPLMUNTG LiftMaster Dual-Purpose RFID Tag [Windshield/Headlamp]). LMUNTG Tag can be installed on surfaces that are made of glass, plastic or fiberglass. When mounted on the windshield, these tags are designed to not interfere with the vision of the driver. Installation of the LMUNTG is critical, as when installed properly the tags are designed to not interfere or obstruct the headlamp's beam per United States DOT specifications. Additionally, the LMUNTG offers an unmatched level of security as their design does not allow them to be removed or transferred once mounted to the vehicle. All LiftMaster tags have been tested to withstand a variety of environmental conditions such as UV exposure, vibration, temperature and humidity cycles. Tags have been engineered for the rigors of automotive use, but handle carefully during installation process. WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov 07/18 LMHNTG FC: 24 ID: 00025 Remove permit while vehicle is in motion. LMHNTG/SPLMHNTG* LiftMaster RFID Hang Tag 07/18 FC: 24 ID: 000025 LMUNTG Windshield/Headlamp Tag FC: 24 ID: 000025 LMUNTG/SPLMUNTG LiftMaster Dual-Purpose RFID Tag (Windshield/Headlamp) NOTE: Please consult your local and state vehicle ordinances to determine the allowable mounting locations for this type of tag. Due to the wide variance in windshield design, this document is intended as a general guide and not inclusive of all vehicle makes and models. This document serves to supply only general guidelines for the correct handling and installation of tags. *If specific Facility Code and Start ID are required, use special part #s SPLMHNTG, SPLMUNTG. NOTE: If the facility code is not visible on the tag it will be "000". Choosing a Proper Tag Mounting Location For optimum performance, the LMUNTG/SPLMUNTG LiftMaster Dual-Purpose RFID Tag (Windshield/Headlamp) must be installed on a windshield location or other suitable mounting point that is facing the RFID reader during normal driving. Hang Tags (LMHNTG) should be attached to your rear view mirror for best results. Reader Reader Reader Tag Read Zone Tag not read Tag Read Zone Preferred Tag Locations Preferred Tag Locations Tag not read Tag Read Zone Preferred Tag Locations Correct Driver Side Reader Placement Correct Overhead Reader Placement Correct Passenger Side Reader Placement NOTE: Use LMHNTG for rear view mirror tag location and LMUNTG for all other tag locations.