LiftMaster MTF MTF Product Data Sheet - Page 1

LiftMaster MTF Manual

Page 1 highlights

MOTORIZED IN-GROUND TRAFFIC SPIKES MTF SECTION 34 71 00 KEY FEATURES PRODUCT TYPE In-ground flush mount STANDARD APPLICATION Multi-directional traffic control INSTALLATION APPLICATIONS Commercial, industrial, security/military SPIKE MAINTENANCE ACCESSIBILITY Top-down modular design for easy service and maintenance TOOTH DESIGN Aggressive tooth SPIKE RETURN SYSTEM Reliable counter-balanced system, low maintenance operation FIRE DEPARTMENT COMPLIANCE Auto-open upon loss of power or battery depletion BATTERY BACK-UP Safe guards property when power is down REMOTE CONTROL ACCESS Built-in 850LM Radio Reciever stores up to 90 remote controls ACCESSORY ADD-ONS Built-in 110V convenience outlet simplified adding accessory devices RELAY OUTPUT K1 Relay provides output signals to activate other accessories or operators during open/close cycles ORIENTATION Left or right SPECIFICATIONS VEHICLE LOAD RATE 36,000 lbs. per single axle load LENGTHS 9 ft., 12 ft., 15 ft. FINISH Powder coat red or corrosion resistant - galvanized with powder coat red WARRANTY 2 year spike and opener, 10 year cabinet VEHICLE CLEARANCE 2.5" or higher OPERATOR SPEED 2.5 seconds to open or close POWER 120V/230V single phase ACCESSORY POWER 24VDC 500 mA output GEAR REDUCTION 60:1 reduced in synthetic oil bath TEMPERATURE -13°F (-25°C) to 140°F (60°C) UL LISTED UL 325 & UL 991 Class II, III, IV CONSTRUCTION MOTOR 1/2 HP equivalent continuous-duty OPERATOR CABINET SPIKE ASSEMBLY ENCLOSURE Powder coated 1/4" aluminim alloy 13100 Red powder coat painted 1/4" construction Welded structural steel spike enclosure PARTS AND HARDWARE Zinc plated moving parts with stainless steel hardware DIMENSIONS TOP VIEW 14.3 29.4 24.8 8.0 12.5 17.6 © 2019 The Chamberlain Group, Inc. All Rights Reserved. LiftMaster, the LiftMaster logo, are registered trademarks of the Chamberlain Group, Inc. LiftMaster.com LMARENDSMTF 7/19 DATA SHEET CSW24U MOTORIZED IN-GROUND TRAFFIC SPIKES

  • 1

PRODUCT TYPE
In-ground flush mount
STANDARD APPLICATION
Multi-directional traffic control
INSTALLATION APPLICATIONS
Commercial, industrial, security/military
SPIKE MAINTENANCE ACCESSIBILITY
Top-down modular design for easy service and maintenance
TOOTH DESIGN
Aggressive tooth
SPIKE RETURN SYSTEM
Reliable counter-balanced system, low maintenance operation
FIRE DEPARTMENT COMPLIANCE
Auto-open upon loss of power or battery depletion
BATTERY BACK-UP
Safe guards property when power is down
REMOTE CONTROL ACCESS
Built-in 850LM Radio Reciever stores up to 90 remote controls
ACCESSORY ADD-ONS
Built-in 110V convenience outlet simplified adding accessory devices
RELAY OUTPUT
K1 Relay provides output signals to activate other accessories or operators during open/close cycles
ORIENTATION
Left or right
VEHICLE LOAD RATE
36,000 lbs. per single axle load
LENGTHS
9 ft., 12 ft., 15 ft.
FINISH
Powder coat red or corrosion resistant - galvanized with powder coat red
WARRANTY
2 year spike and opener, 10 year cabinet
VEHICLE CLEARANCE
2.5” or higher
OPERATOR SPEED
2.5 seconds to open or close
POWER
120V/230V single phase
ACCESSORY POWER
24VDC 500 mA output
GEAR REDUCTION
60:1 reduced in synthetic oil bath
TEMPERATURE
-13°F (-25°C) to 140°F (60°C)
UL LISTED
UL 325 & UL 991
Class II, III, IV
MOTOR
1/2 HP equivalent continuous-duty
OPERATOR CABINET
Powder coated 1/4” aluminim alloy
SPIKE ASSEMBLY
Red powder coat painted 1/4” construction
ENCLOSURE
Welded structural steel spike enclosure
PARTS AND HARDWARE
Zinc plated moving parts with stainless steel hardware
MOTORIZED IN-GROUND TRAFFIC SPIKES
MTF
SECTION 34 71 00
DATA SHEET
CSW24U
MOTORIZED IN-GROUND
TRAFFIC SPIKES
© 2019 The Chamberlain Group, Inc. All Rights Reserved.
LiftMaster, the LiftMaster logo, are registered trademarks
of the Chamberlain Group, Inc.
LiftMaster.com
LMARENDSMTF 7/19
TOP VIEW
29.4
14.3
24.8
12.5
8.0
17.6