Linksys APP1000 Installation Guide - Page 15

Ground Conductor Warning: Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Linksys One Application Server Appliance Power Supply Installation Warning: The optional Power Cube power supply must be placed indoors. Refer to the installation manual provided with this product. Circuit Breaker: This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 120 VAC, 15A U.S. (240 VAC, 10A international). Main Disconnecting Device: The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Power Supply: Only use the Linksys-specified Cisco Power Cube 3 power supply. Refer to the installation manual provided with this product. License Agreement Linksys Software License Agreement v.2.14.05 THIS LICENSE AGREEMENT IS BETWEEN YOU AND CISCO-LINKSYS LLC 11 ("Linksys"). BY DOWNLOADING OR INSTALLING THE SOFTWARE, OR USING THE PRODUCT CONTAINING THE SOFTWARE, YOU ARE CONSENTING TO BE BOUND BY THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, THEN YOU MAY NOT DOWNLOAD, INSTALL OR USE THE SOFTWARE. YOU MAY RETURN UNUSED SOFTWARE (OR, IF THE SOFTWARE IS SUPPLIED AS PART OF ANOTHER PRODUCT, THE UNUSED PRODUCT) FOR A FULL REFUND UP TO 30 DAYS AFTER ORIGINAL PURCHASE, SUBJECT TO THE RETURN PROCESS AND POLICIES OF THE PARTY FROM WHICH YOU PURCHASED SUCH PRODUCT OR SOFTWARE. License. Subject to the terms and conditions of this Agreement, Linksys grants the original end user purchaser of the Linksys product containing the Software ("You") a nonexclusive license to use the Software solely as embedded in or