Linksys DMP100 User Guide - Page 54
User Information for Consumer, Products Covered by EU Directive - drivers
UPC - 745883586400
View all Linksys DMP100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Wireless Home Audio The requirements for any country may evolve. Linksys recommends that end-user check with the local authorities for the latest status of their national regulations for both the 2.4 GHz and the 5.0 GHz. Table A-Overview of Regulatory Requirements for Wireless LANs Frequency Band (MHz) Max. Power Level EIRP (mW) Indoor Indoor & Only Outdoor 2400-2483.5 100 X 5150-5250 200 X 5250-5350† 200 X 5470-5725† 1000 X ††Dynamic Frequency Selection (DFS) and Transmit Power Control (TCP) are required in the frequency ranges of 5250-5350 MHz and 5470-5725 MHz. Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC) are required for operation in the 5.0 GHz band. DFS: This function is required by the national regulations to avoid interference with the Radio Location Services (radars) when operating in the 5.250-5.350 GHz & 5.470-5.725 GHz bands. This device operates in a client mode without radar detection capability. The client software and associated drivers will not initiate any transmission in the DFS frequencies during the presence of radar. TPC: For operation in the 5.0 GHz band, the maximum power level is 3 dB or more below the applicable limit. As such, TPC is not required. This product contains a wireless-N, -G, -B, and/or -A transceiver, intended for use in all EU countries, and all other countries following EU directive 1999/5/EC, without any limitation except for any country listed in the restriction of use below: Ce produit contient un sans fil-N, - G, - B, et/ou - A émetteur récepteur, destiné à l'utilisation dans tous les pays de l'UE, et tous autres pays après l'UE 1999/5/EC directif, sans n'importe quelle limitation excepté n'importe quel pays énuméré dans la restriction de l'utilisation ci-dessous : Dieses Produkt enthält ein drahtloses-n, - G, - ein B und/ oder - ein Lautsprecherempfänger, bestimmt für Gebrauch in allen EU-Ländern und in allen weiteren Ländern nach EU richtungweisendes 1999/5/EC, ohne irgendeine Beschränkung außer jedem möglichem Land, das nachstehend in der Beschränkung des Gebrauches aufgeführt wird: Cer produit zahlt contient un sans fil-N, - G, - B, et/ou - ein émetteur récepteur, destiné à l'utilisation dans tous les de L'UE, und zahlt tous autres après l'UE 1999/5/EC directif, sans, n'importe quelle Beschränkung excepté n'importe, das quel énuméré dans la restriction de L'utilisation Ci-dessous zahlt: Croatia In Croatia, license is required in the band 5150-5350 MHz. France In France, outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz. For detailed information, the end-user should contact the national spectrum authority in France or visit http://www.arcep.fr/ Player/Wireless-N Music Extender Regulatory Information Denmark In Denmark, the band 5150-5350 MHz is also allowed for outdoor usage. Italy In Italy, if used outside of own premises, "general authorization" is required within the band 5150-5350 MHz & 5470-5725 MHz. For detailed information on applying for license, the end-user should contact the national spectrum authorities in Italy or visit http://www.comunicazioni.it/it/ Latvia In Latvia, outdoor usage of the 2,4 GHz band requires an authorization from the Electronic Communications Office. For detailed information, please visit http://www.esd.lv Notes: 1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries. 2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm). Third-Party Software or Firmware The use of software or firmware not supported/provided by Linksys may result that the equipment is no longer compliant with the regulatory requirements. Technical Documents on www.linksysbycisco.com/international Follow these steps to access technical documents: 1. Enter http://www.linksysbycisco.com/international in your web browser. 2. Select the country or region in which you live. 3. Click the Products tab. 4. Select the appropriate product category. 5. Select the product sub-category, if necessary. 6. Select the product. 7. Select the type of documentation you want from the More Information section. The document will open in PDF format if you have Adobe Acrobat installed on your computer. NOTE: If you have questions regarding the compliance of this product or you cannot find the information you need, please contact your local sales office or visit www.linksysbycisco.com/international User Information for Consumer Products Covered by EU Directive 47