Linksys DMSPK50 Quick Installation Guide - Page 3
Installation Overview
UPC - 745883586493
View all Linksys DMSPK50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Installation Overview This Quick Installation Guide will guide you through connecting each two-wire cable to a speaker at one end, and your audio amplifier at the other end. For each channel (Left and Right), you will connect the red coded input terminal on the speaker to the red coded output terminal of the audio amplifier, and equivalently the black to the black. To ensure proper operation and sound quality, the cables must be connected to the speakers correctly. Do not allow any cable strands to touch the other polarity or the rear panel of the amplifier. Make sure that the speakers are connected to the correct Left and Right outputs. NOTE: If the colors are not matching at both ends, the speakers will play out-of-phase, resulting in the reduction of dynamics and bass and the elimination of the position of the music or vocals in between the two speakers. NOTE: The speakers are interchangeable and can be used as either the left or right speaker. The terminals and the cables are color coded for correct polarity. Connecting the Speakers to the Director