Linksys EF2H24 User Guide - Page 4

Instant EtherFast II Series Package Contents for the EtherFast II 10/100 Hub (16 and 24-Port Model) • EtherFast II 10/100 Hub • Rack Mounting Hardware • AC Power Cord • User Guide 2 10/100 Hubs Planning Your Network Overview The rules that govern how nodes and hubs are distributed across a network are important to ensure the integrity of your data. Cabling specifications, distance limits, and other topology rules must be followed in order to avoid collisions, data loss, and downed network connections. The 10/100 Hub is equipped with RJ-45 ports that can automatically adjust to either 10Mbps or 100Mbps speeds. Each port can operate at either speed, completely independent of the other ports' speeds, and can be connected to a workstation, file server, print server, hub, or another node with twisted-pair cabling. Although there are different grades of cabling, you must use EIA 568 Category 5 unshielded twisted-pair (UTP), or better, for each connection you make, and each cable should not exceed 100 meters, (328 feet), in length. Category 5 cabling can be obtained at most computer stores, or you can crimp your own. See page 8 for cabling specifications. Here are some important cabling rules to follow: · Computers should never be connected directly together on a network. They should always be connected to a hub. · Only two 100Mbps Fast Ethernet hubs can be cascaded, (or uplinked), together. To cascade more than 2 100Mbps hubs, a switch or a repeater must be used. · The maximum length for a Category 5 cable between a 100BaseTX or 10BaseT workstation and a hub is 100 meters (328 feet). · The maximum distance between 2 100BaseTX hubs without a switch is 5 meters (16.4 feet). · The maximum distance between 2 10BaseT hubs, (or a 10BaseT hub and an Auto-Sensing hub), is 100 meters (328 feet). 3