Linksys NSS2000 Cisco NSS4000 and NSS6000 Series Network Storage System Gettin - Page 23
Step 5: Create a Volume
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter Getting Started Guide 3 3. From the RAID Level drop-down menu, click the RAID level of the RAID array you want to create. 4. Click Add. The RAID creation can take some time to complete (depending on the size of the disks and the selected RAID level). You can monitor the progress of the RAID build from the Storage Status page. When the build is finished, the array appears in the RAID Arrays table. The disks used in the array are no longer available for creating additional arrays. Step 5: Create a Volume After you define at least one RAID array, you can create a volume. You need to create at least one volume before you can create users, groups, or shares. To create a volume: 1. From the Manager Menu, click Storage Volumes. The Storage Volumes page appears. 2. From the New Volume area, set up the following fields: • Array: Click the drop-down menu to select the array on which you want to create the volume. • Name: Enter the name you want to give the volume. The volume name must consist of at least one alphanumeric character, must begin with a letter, but cannot contain any spaces. Chapter 3: Configuring the Network Storage System 21 (NSS)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55