Linksys NSS4100 Cisco NSS4000 and NSS6000 Series Network Storage System Gettin - Page 32

Chapter 3 Getting Sarted Guide The New User page appears. 3. In the Username field, type the username. The name must be made up of alphanumeric characters (that is, a-z, 0-9), any case, to a maximum of 32 characters. This field is required. 4. Select the group you want to assign as the user's primary group from the Primary Group field. If there are no groups configured, the only available choice is the default group "nasusers". This field is required. NOTE: Although you can assign the user to multiple groups (through the Add Group or Edit Group page), the primary group is the group against which quota charges for the user's storage usage are made and is the group that defines the group ownership for all files created by the user. The primary group applies to users set up locally on the NSS. A domain user's primary group is set up from the domain and is not derived from the Primary Group field in the NSS user profile. 5. Assign a password by entering any valid (ASCII table) characters in the Password field. The password is required. To verify the password, re-enter it in the Confirm Password field. NOTE: All password changes to end-user accounts set up through the NSS configuration pages must be made by the administrator. 6. To record the user's full name, enter it in the Real Name field. This field is optional. Note that you cannot enter the "/" character in this field. 30 Chapter 3: Configuring the Network Storage System (NSS) Step 9: Create any Locally Defined Users and Groups