Linksys PCM100 User Guide - Page 18

Instant EtherFast® Series 13. When asked if you want to restart your computer, remove the Driver Disk and click Yes. 14. Once your PC has rebooted and you log on to the network, double-click the Network Neighborhood icon on your desktop. Make sure that you have access to the network. If you do, you card has been properly installed. Note: If you had previously installed any NT service packs, you must reinstall them. Windows NT Installation and Setup for the EtherFast 10/100 PC Card is complete. Do not continue with the next set of instructions. They are for NT users who already have their networking configured. EtherFast® 10/100 PC Cards Installing the EtherFast Network Driver if Networking is Already Installed The following steps will install the EtherFast Card's driver software on your PC, enabling your PC to properly communicate with the card. Remember that you must be logged on as a network administrator to continue. 1. Click on Start, Settings, Control Panel, then double-click on the Network icon. 2. When the networking window appears, choose the Adapters tab. Click the Add button. Note: For information and help on choosing your bindings, services and protocols, ask your network administrator or check your Windows NT documentation. 30 31