Linksys SD208 Cisco SD208 8-Port 10/100 Switch Quick Start Guide - Page 2

3 Installation Perform the steps in this section to install the hardware. STEP 1 Make sure all of the devices you will connect to the Switch are powered off. STEP 2 Connect a Category 5 Ethernet network cable to one of the numbered ports on the Switch. Connect the other end to a computer or other network device. STEP 5 Power on the devices connected to the Switch. Each active port's corresponding LED will light up on the Switch. Congratulations! The installation of the 10/100 Switch is complete! Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R) © 2008 Cisco Systems, Inc. All rights reserved. Printed in the USA on recycled paper containing 10% postconsumer waste. 78-18819-01 STEP 3 Repeat step 2 to connect additional devices. STEP 4 Connect the supplied power adapter to the power port on the Switch's side panel. Plug the other end of the adapter into an electrical outlet. ! CAUTION Make sure you use the power adapter included with the Switch. Using a different power adapter may damage the Switch. 4 Specifications The following table lists the specifications for the SD208 10/100 Ethernet Switch. Item Model Standards Ports Cabling Type LEDs Security Feature Dimensions Specification SD208 IEEE 802.3, IEEE 802.3u 8 RJ-45 10/100 Mbps ports Cat5 Ethernet System, Port Status 1 through 8 Security Slot WxHxD 5.12" x 1.18" x 5.00" Unit Weight Power Certification Operating Temperature Storage Temperature Operating Humidity Storage Humidity 130 x 30 x 127 mm 15 Ounces (0.43 kg) DC12V/500mA FCC Class B, CE 32 to 122ºF (0 to 50ºC) -40 to 158ºF (-40 to 75ºC) 20 to 95%, noncondensing 5 to 90%, noncondensing 5 Where to Go From Here Resource Location Customer Support www.cisco.com/go/smallbiz End User License Agreement www.cisco.com/go/smallbiz Regulatory Compliance and Safety www.cisco.com/go/smallbiz Information Warranty Information www.cisco.com/go/smallbiz Cisco Partner Central site for Small http://www.cisco.com/web/partners/ Business sell/smb/