Linksys SD208 Cisco Small Business Model SD208P 8-Port 10/100 Unmanaged Switch - Page 2
Typical Installation Scenario, Installation, Specifications, Where to Go From Here - switch configuration
UPC - 745883556823
View all Linksys SD208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
2 Typical Installation Scenario The application diagram shown here is an example of a typical network configuration. When you connect your network devices, make sure you don't exceed the maximum cabling distances, which are listed in the following table: From Switch Switch or Hub To Switch or Hub Computer Maximum Distance 100 meters (328 feet) 100 meters (328 feet) Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R) © 2009 Cisco Systems, Inc. All rights reserved. Printed in the USA on recycled paper containing 10% postconsumer waste. 78-18926-01 3 Installation Perform the steps in this section to install the hardware. STEP 1 Connect a Category 5 Ethernet cable to one of the numbered ports on the Switch. Connect the other end to a computer or other network device. NOTE Use Category 5e Ethernet network cables for your Gigabit connections. STEP 2 Repeat step 1 to connect additional devices. STEP 3 Connect the supplied power adapter to the power port on the Switch. Plug the other end of the adapter into an electrical outlet. ! CAUTION Make sure you use the power adapter included with the Switch. Using a different power adapter may damage the Switch. STEP 4 Power on the devices connected to the Switch. Each active port's corresponding LED will light up on the Switch. Congratulations! The installation of the Switch is complete! 4 Specifications The following table lists the specifications for the SD208 10/100 Ethernet Switch. Item Model Standards Ports Cabling Type LEDs Security Feature Dimensions Specification SD208P IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3af 8 RJ-45 10/100 Mbps ports Cat5 Ethernet Power, Link/ACT 1 through 8, PoE Status 1 through 4, PoE Max Security Slot WxHxD 5.51" x 1.31" x 5.51" Unit Weight Power Certification Operating Temperature Storage Temperature Operating Humidity Storage Humidity 140x33.35x140 mm 0.723 lbs (0.328Kg) DC48V/1.25A FCC Class B, CE 0ºC to 40ºC (32ºF to 104ºF) -40ºC to 70ºC (-40ºF to 158ºF) 20 to 95%, relative humidity, NonCondensing 5% to 90% Non-Condensing 5 Where to Go From Here Resource Technical Documentation Customer Support End User License Agreement Regulatory Compliance and Safety Information Warranty Information Cisco Partner Central site for Small Business Location www.cisco.com/en/US/products/ps10007/ tsd_products_support_series_home.html www.cisco.com/web/products/index.html www.cisco.com/go/warranty www.cisco.com/en/US/products/ps10007/ tsd_products_support_series_home.html www.cisco.com/go/warranty www.cisco.com/web/partners/sell/smb/