Linksys SFE2000P Cisco SFE2000, SFE2000P Fast Ethernet Switch Reference Guide - Page 9
Getting Started, Starting the Application - sfe2000 default ip
UPC - 745883577989
View all Linksys SFE2000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Chapter SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide 1 Getting Started This section provides an introduction to the user interface, and includes the following topics: • Starting the Application • Understanding the Interface • Using the Linksys Management Buttons • Using Screen and Table Options • Resetting the Device • Logging Off The Device Starting the Application This section contains information for starting the Linksys User Interface. Note By default, the IP address of the device is assigned dynamically. The IP address can be changed. It is recommended to configure the IP address statically, if the system is in stack mode, in order to prevent the user from disconnecting from the network in the event of master switchover. To open the User Interface: 1. Open a web browser. 2. Enter the device's IP address in the address bar and press Enter. An Appendix 1, "Enter Network Password Page" opens: Chapter 1: 1