Linksys SFE2000P Cisco SGE2000, SGE2000P Gigabit Ethernet Switch Reference Gui - Page 56
Number of Retries, Timeout for Reply, Dead Time, Key String, Source IP Address, Usage Type, Priority - sge2000p default login
UPC - 745883577989
View all Linksys SFE2000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Chapter 4 SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide • Number of Retries - Defines the number of transmitted requests sent to RADIUS server before a failure occurs. The possible field values are 1 - 10. Three is the default value. • Timeout for Reply - Defines the amount of the time in seconds the device waits for an answer from the RADIUS server before retrying the query, or switching to the next server. The possible field values are 1 - 30. Three is the default value. • Dead Time - Defines the amount of time (minutes) that a RADIUS server is bypassed for service requests. The range is 0-2000. The Dead Time default is 0 minutes. • Key String - Defines the default key string used for authenticating and encrypting all RADIUS communications between the device and the RADIUS server. This key must match the RADIUS encryption. • Source IP Address - Defines the source IP address that is used for communication with RADIUS servers. • Usage Type - Specifies the RADIUS server authentication type. The default value is Login. The possible field values are: - Login - Indicates that the RADIUS server is used for authenticating user name and passwords. - 802.1X - Indicates that the RADIUS server is used for 802.1X authentication. - All - Indicates that the RADIUS server is used for authenticating user name and passwords, and 802.1X port authentication. 2. Click the Add button. The Add Radius Server Page opens: Add Radius Server Page The Add Radius Server Page contains the following fields: • Host IP Address - Displays the RADIUS Server IP address. • Priority - The server priority. The possible values are 0-65535, where 1 is the highest value. The RADIUS Server priority is used to configure the server query order. • Authentication Port - Identifies the authentication port. The authentication port is used to verify the RADIUS server authentication. The authenticated port default is 1812. 48 Chapter 4: Configuring Device Security Defining Authentication