Linksys SPA2102-AN Fax Guide - Page 1

Quick Install Guide Fax Extension for the Linksys SPA 2102 ATA Quick Activation and Installation Guide Welcome to Fax Extension Service with 8x8 Virtual Office! Getting your Fax Extension Service up and running on your Linksys SPA 2102 Analog Terminal Adaptor takes just a few minutes. Activating Your Linksys ATA You will need your activation code to activate your Linksys ATA. The activation code was sent via email. You can also retrieve it in the 8x8 Account Manager by following these instructions: 1. Go to www.8x8.com, click Sign-In and select Account Manager. 2. Enter your administrator username and password. 3. Click Phone System from the top naviation bar and select Extensions. 4. Click Activate Device next to the extension you wish to activate. 5. A pop-up screen displays the activation code for the extension. 6. Connect your ATA to a power source and a router or modem with an Internet connection. 7. Make sure a phone is connected to the Phone 1 plug on the Linksys ATA that you want to activate. --If your fax machine has a telephone, lift the handset and follow the voice instructions to enter the activation code and activate your port --If your fax machine does not have a built-in telephone, temporarily connect any analog telephone to activate this port, then plug your fax machine back in for fax service. 8. Follow the instructions on page 2 to install your ATA. Assistance If you would prefer to set up your service over the phone at no extra charge: Call 1.866.208.9369 to schedule an appointment.