Linksys SPA922 Cisco Small Business IP Phone SPA9X1 Administration Guide - Page 49
tings tab, as shown in, The following is an example value - na
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Localization Chapter 3 Managing Linksys IP Phones • Dictionary server script-This parameter is used to define the location of the dictionary server, the languages available and the associated dictionary. The syntax is as follows: The default is blank and the maximum number of characters is 512. The detailed format is as follows: serv={server ip port and root path}; d0=;x0=; d1=;x1=; d2=;x2=; d3=;x3=; d4=;x4=; d5=;x5=; d6=;x6=; d7=;x7=; d8=;x8=; d9=;x9=; The following is an example value: serv=tftp://192.168.1.119/;d0=English;x0=enS_v101.xml;d1=Spanish;x1=esS_v101.xml • Language Selection-This parameter is used to select the default language. Its value needs to match one of the languages supported by the dictionary server. The script (dx value) is as follows: The default is blank and the maximum number of characters is 512. The following is an example: Spanish These parameters can also be modified from the administration web server, on the Regional settings tab, as shown in Figure 3-3. Figure 3-3 Dictionary Server Configuration Parameters During startup, the phone checks the selected/preferred language and downloads the dictionary from the TFTP/HFTP provisioning server indicated in the device configuration. The dictionaries are available at the following website: http://www.linksys-itsp.com Linksys IP Phone Administrator Guide 3-6 Firmware Version 5.1