Linksys SR2024 Cisco SR2024 24-Port 10/100/1000 Gigabit Switch Quick Start Gui - Page 9

Chapter 2: Product Overview Chapter 2: Product Overview Front Panel The LEDs and ports are located on the front panel of the Switch. SR2024 SYSTEM Link/Act Gigabit Link/Act Gigabit 24-Port 10/100/1000 Gigabit Switch LEDs Front Panel (Shared with 12) (Shared with 24) miniGBIC1 miniGBIC2 System (Green) The System LED will light up when the Switch is powered on. Link/Act (Green) Each LED will light up when there is a connection made through its corresponding port. It will flash when there is activity on its corresponding port. Gigabit (Amber) Each LED will light up when there is a Gigabit connection made through its corresponding port. It will flash when there is activity on its corresponding port. Ports 1-24 The Switch is equipped with 24 auto-sensing RJ‑45 ports. These RJ-45 ports support network speeds of either 10Mbps, 100Mbps, or 1000Mbps and can operate in half and full-duplex modes. Auto-sensing technology enables each port to automatically detect the speed of the device connected to it and adjust its speed and duplex accordingly. To connect a device to a port, you will need to use a network cable. You will need to use Category 5 (or better) cables. 24-Port 10/100/100 Gigabit Switch