Linksys WAP54GP Cisco WAP54GP Wireless-G Access Point with Power Over Ethernet - Page 42
The Status - Wireless Tab
UPC - 745883562817
View all Linksys WAP54GP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Wireless-G Access Point with Power Over Ethernet The Status - Wireless Tab The Wireless screen displays the Access Point's current status information for the wireless network(s). Wireless Network MAC Address. The MAC Address of the Access Point's wireless interface is displayed here. Mode. The Access Point's wireless network mode is displayed here. Main SSID. The Access Point's primary SSID is displayed here. Virtual SSID1-7. The Access Point's alternative SSIDs are displayed here. Channel. The Access Point's Channel setting for the primary SSID is shown here. VLAN Trunk. This shows if VLAN Trunk is enabled on this Access Point. Priority. This shows if 802.1p Priority Setting is enabled on this Access Point. Main SSID & Virtual SSID1-7 Security Mode. This column shows if any type of wireless security (e.g. WEP, WPA-Enterprise, etc.) is enabled for a given SSID. Main SSID & Virtual SSID1-7 Priority. This column shows 802.1p priority setting for a given SSID. It shows Disabled if Priority feature is not enabled. To update the status information, click the Refresh button. Help information is displayed on the right-hand side of the screen. Figure 6-26: Status - Wireless Chapter 6: Configuring the Wireless-G Access Point with Power Over Ethernet 36 The Status - Wireless Tab