Linksys WAP54GP Cisco Small Business WRV210 Administration Guide - Page 74
Local Group, Key Methods, Tunnel Status, NAT-T, Start/Stop/Restart Connection, Detail, VPN Log
UPC - 745883562817
View all Linksys WAP54GP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Configuring a Virtual Private Network (VPN) Monitoring the IPSec VPN Tunnels 5 configured type of remote group is Host or Any, the field displays the "Host" or "Any" directly. • Local Group: The field displays the local peer that is designated for VPN communication after an IPSec VPN tunnel is established. If the preconfigured type of local group is IP Addr., the field displays the IP address of the local peer. If the pre-configured type of local group is Subnet, the field displays the subnet type "IP Address/Mask". If the pre-configured type of local group is Host, the field displays the "Host" directly. • Key Methods: The field displays the IPSec authentication and encryption key methods of the Key exchange Method that is followed with the setting value of the Password Forward Secrecy. • Tunnel Status: The field displays the status of IPSec Tunnel as follows. - C: The tunnel is connected. - T: The tunnel is trying to connect to remote peer. - Stop: The tunnel is stopped. - D: The tunnel is disabled. - Any: The tunnel always waits for the connection from the remote initiator. - NAT-T: The tunnel enables the NAT-Traversal to allow the remote initiator that is behind the NAT to construct this IPSec Tunnel. • Start/Stop/Restart Connection: The name of the button changes, depending on the previous actions you have performed. For troubleshooting, you can click the button to start, stop, or restart the connection according to pre-configured tunnel settings. If the preconfigured type of remote gateway or remote group is either Any or NATTraversal, the Detail button can also examine Remote Security Gateway information. • Detail: This button becomes available when the Tunnel Status is C, T, Any, or NAT-T. Click Detail to view the VPN Advanced Tunnel Information page. This page provides more detailed information for advanced configuration and management. • VPN Log: Click this button to check the overall related VPN behaviors and contact messages of a VPN Tunnel and VPN Client. After viewing the log information, you can clear it by clicking Clear Log Now. • Refresh: Click this button to update the page with current VPN status information. Cisco Small Business WRV210 Administration Guide 74