Linksys WAP54GPE Cisco Small Business WRV210 Administration Guide
Linksys WAP54GPE - Wireless-G Exterior Access Point Manual
UPC - 745883560387
View all Linksys WAP54GPE manuals
Add to My Manuals
Save this manual to your list of manuals |
Linksys WAP54GPE manual content summary:
- Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 1
ADMINISTRATION GUIDE Cisco Small Business WRV210 Wireless-G VPN Router with RangeBooster - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 2
Work, Live, Play, and Learn, Cisco Store, and Flip Gift Card are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 3
Configuring the Internet Connection Securing the Wireless Network Getting Started in the Network DynDNS.org Setup TZO.com Setup Cloning a MAC Address for Your Internet Connection Setting Up Advanced Routing Configuring Dynamic Routing Cisco Small Business WRV210 Administration Guide Contents 6 6 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 4
Wireless > Wireless Security 39 Controlling Access to the Wireless Network 43 Adjusting the Advanced Wireless Settings 45 Configuring a Wireless Distribution System (WDS) 47 Chapter 4: Configuring the Firewall 49 Preventing Attacks 50 Enabling Port Forwarding to Allow Access to Services - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 5
Access to the Configuration Utility Configuring SNMP Settings for Status Reporting Configuring Universal Plug and Play (UPnP) Settings Backing and Restoring a Configuration Setting Up Alerts and System Logs Performing Diagnostic Tests Reverting to the Factory Default Settings Upgrading the Firmware - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 6
full-duplex 10/100 Ethernet switch that can connect up to four devices. Features The wireless Access Point supports 802.11b/g and incorporates RangeBooster technology, which utilizes a MIMO antennae configuration to provide increased coverage and reliability over standard 802.11g. The WRV210 has the - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 7
wireless network. There is support for Wireless Distribution System (WDS), which allows the wireless coverage to be expanded without wires through wireless bridging between it and select Cisco Small Business stand-alone access points that port. Cisco Small Business WRV210 Administration Guide 7 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 8
Reset button resets the Router's factory defaults. You can also restore the factory defaults from the Administration > Factory Defaults . Initial Installation Follow the instructions below to connect the equipment and configure the Internet connection and wireless network. • "Placement Options - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 9
Securing the Wireless Network, page 13 Placement Options You can place the router horizontally on a desktop or mount it on head exposed. STEP 3 With the back panel pointing up (if installing vertically), position the router so that the wall-mount crisscross slots on the bottom panel line up Guide 9 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 10
cable for the purpose of the initial configuration. After you complete the initial configuration, administrative tasks can be performed from a wireless connection. STEP 3 Repeat the previous step to connect more PCs, a switch, or other network devices to the Router. STEP 4 Connect an Ethernet - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 11
the cable connections. • Check the LED states, as described in Front Panel, page 7. NOTE If you need help resolving a problem, visit the Cisco Small Business Support Community at www.cisco.com/go/smallbizsupport. For technical documentation and other links, see Appendix B, "Where to Go From Here - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 12
menu. Complete the Internet IP Address, Subnet Mask, Default Gateway, and DNS fields. Enter at least one DNS address. • PPPoE: If you are connecting through PPPoE, select PPPoE from the dropdown menu. Complete the User Name and Password fields. Cisco Small Business WRV210 Administration Guide 12 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 13
that you want to configure. You will need to repeat this procedure for each SSID that you enabled on the Basic Wireless Settings page. STEP 3 Choose the Security Mode. Cisco recommends using the highest level of security that is supported by your network devices. Choose from the following options - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 14
(the default option) to prevent communication and file transfers between the PCs. STEP 5 In the final section of the page, enter the required information, based on the chosen security mode, as described below. For WPA Enterprise modes and RADIUS (WEP) mode: • RADIUS Server IP Address: Enter the IP - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 15
instructs the router how often it should change the encryption keys. The default is 3600 seconds, which is 1 hour. For WEP mode and RADIUS (WEP) mode: • Authentication Type: Choose one of the following options: - Open System: A wireless client doesn't need to provide a shared key in order to access - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 16
the Wireless-G VPN router with RangeBooster is complete. Use this Administration Guide to configure other settings, as needed. Getting Started in the Configuration Utility Logging In To access the Configuration Utility, launch Internet Explorer or Firefox, and enter the Router's default IP address - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 17
Files To view more information about a configuration page, click the Help link near the top right corner of the page. Cisco Small Business WRV210 Administration Guide 17 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 18
Network, page 26 • Cloning a MAC Address for Your Internet Connection, page 29 • Setting Up Advanced Routing, page 30 Configuring the Basic Settings Use the Setup > Basic Settings page to perform the • "Adjusting the Time Settings" on page 24 Cisco Small Business WRV210 Administration Guide 18 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 19
Configuring the Basic Settings 2 Localizing the Configuration Utility You can change the language that appears on the configuration pages. STEP 1 Click Setup > Basic Settings in the navigation tree. STEP 2 From the Language Selection drop-down list, choose one of the following languages: English - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 20
Setup section, choose the Internet Connection Type required by your ISP. Then enter the required information for the selected connection. The Router supports external users on the Internet (including your ISP). - Default Gateway: Enter the Default Gateway Address, which is the ISP server's IP address - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 21
, as seen by external users on the Internet (including your ISP). - Default Gateway: Enter the Default Gateway Address, which is the ISP server's IP address. - PPTP Server IP: Enter the IP address of the ISP's PPTP server. - User Name and Password: Enter the User Name and Password provided by your - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 22
Mask, as seen by external users on the Internet (including your ISP). - Default Gateway: Enter the Default Gateway Address, which is the ISP server's IP address. - L2TP Server IP: Enter the IP address of the L2TP server. - User Name and Password: Enter the User Name and Password provided by your ISP - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 23
's configuration utility to assign a static IP address to the WRV210. • Start IP Address: Enter the first IP address in the range of addresses that are assigned by the DHCP server. Assuming that you are using the default router IP address of 192.168.1.1, the Start IP address must be greater than 192 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 24
range of DHCP addresses that will be assigned, based on your entries in the Start IP Address field and the Number of Address field. • Client Lease Time: Enter the number of seconds that a DHCP client can keep an assigned IP address before it sends a renewal request to the DHCP server. The default - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 25
port of the Router. Each VLAN is a separate subnet. STEP 1 Click Setup > VLAN in the navigation tree. STEP 2 Enter the following information: • feature. When enabled, and a VLAN is selected, VLAN1 is enabled as a default VLAN, so you have two VLANs. Select Disabled to disable the feature. When - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 26
the Router and your ISP does not give you a fixed IP address. Before you can use this feature, you need to sign up for DDNS service at one of two DDNS service providers, DynDNS.org or TZO.com. • DynDNS.org Setup, page 27 • TZO.com Setup, page 28 Cisco Small Business WRV210 Administration Guide 26 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 27
Setup > DDNS in the navigation tree. STEP 2 From the DDNS Service Provider drop-down list, choose DynDNS.org. STEP 3 Enter the following information: • User Name, Password, and Host Name: Enter the User Name, Password, and Host Name of the account you set up with DynDNS.org. • Internet IP Address - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 28
Setup > DDNS in the navigation tree. STEP 2 From the DDNS Service Provider drop-down list, choose TZO.com. STEP 3 Enter the following information: • Email, TZO Password Key, and Domain Name: Enter the E-mail Address, TZO Password Key, and Domain Name of the service you set up with TZO. • Internet IP - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 29
ISP, you can use the MAC Address Clone feature to associate the registered MAC address with your WRV210 Router. This feature saves you the trouble of contacting your ISP to change the registered MAC address to the Router's MAC address. STEP 1 Click Setup > MAC Address Clone in the navigation tree - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 30
Setting Up the Network Setting Up Advanced Routing 2 address. It is recommended to use the PC registered with the ISP for this operation. STEP 4 Click Save to routing. • Configuring Dynamic Routing, page 31 • Setting Up Static Routing, page 32 Cisco Small Business WRV210 Administration Guide 30 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 31
the network. STEP 1 Click Setup > Advanced Routing in the navigation tree. STEP 2 To support dynamic routing, change the leave the default selection, Gateway. This setting enables NAT (Network Address Translation) to map your private network addresses to the IP address that Administration Guide 31 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 32
host or network. STEP 1 Click Setup > Advanced Routing in the navigation name for this route. • LAN IP Address: Enter the address of the remote network or host to Wireless: The destination device is connected to your LAN or wireless network. Cisco Small Business WRV210 Administration Guide 32 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 33
open a screen displaying how packets are routed through your local network. For each route, the Destination LAN IP address, Subnet Mask, Gateway, and Interface are displayed. Click Refresh to update the information. Click Close to exit this screen. STEP 3 Click Save to save your settings, or click - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 34
network name or SSID Wireless devices have a default wireless network name or Service Set Identifier (SSID) set by the factory. This is the name of your wireless network, and can be up to 32 characters in length. Linksys wireless products use linksys as the default wireless network name. You should - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 35
browsing for wireless networks. • Change the default password For wireless products such as access points, routers, and gateways, you will be asked for a password when you want to change their settings. These devices have a default password set by the factory. The Linksys default password is admin - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 36
Configuring the Wireless Network A Note About Wireless Security 3 • Turn wireless routers, access points, or gateways off when they are not being used (at night, during vacations). • Use strong passphrases that are at least eight characters in length. Combine - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 37
the network traffic, to allow different levels of access, such as guest access, or to allow access for different functions such as accounting, billing, and so on. STEP 1 Click Wireless > Basic Wireless Settings in the navigation tree. STEP 2 From the Wireless Network Mode drop-down list, choose the - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 38
from nearby wireless access points. • U-APSD: Select Enable it you want to use the Unscheduled Automatic Power Save Delivery (U-APSD) feature to conserve power. STEP 4 In the Wireless LAN Schedule, set up schedules when your the SSID2-SSID4 networks are available. NOTE SSID 1 is the default and is - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 39
the range of User Service) can be used with either WPA or WEP to authenticate users from a database on a RADIUS server. For detailed instructions on configuring wireless security for the Router, see "A Note About Wireless Security" on page 34. NOTE If you configured multiple networks (SSIDs), repeat - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 40
not support wireless hotspot location. Choose Disabled (the default option) to prevent communication and file transfers between the PCs. STEP 5 Enter the required information, based on the chosen mode: For WPA Enterprise modes and RADIUS (WEP) mode: • RADIUS Server IP Address: Enter the IP address - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 41
change the encryption keys. The default is 3600 seconds, which is 1 hour. For WEP mode and RADIUS (WEP) mode: • Authentication Type: Choose one of the following options: - Open System: A wireless client doesn't need to provide a shared key in order to access the wireless network. Any client can - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 42
in order to access the wireless network. • Default Transmit Key: To indicate which WEP key to use, select the appropriate Default Transmit Key number. Passphrase: If you want to generate a key instead of entering a key manually, type a passphrase in the field. You can enter up to 32 Guide 42 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 43
Enabling Your Wireless Networks 3 Controlling Access to the Wireless Network This screen allows you to control access to your wireless network for each SSID. NOTE If you configured multiple networks (SSIDs), repeat this procedure for each one. STEP 1 Click Wireless > Wireless Network Access in - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 44
accessing your wireless network. - Permit to access: Choose this option to allow only the specified computers to access your network. • MAC 1 to MAC 16: To specify the computers that are subject to your policy, enter the MAC addresses settings. Cisco Small Business WRV210 Administration Guide 44 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 45
by an advanced user as incorrect settings can reduce wireless performance. STEP 1 Click Wireless > Advanced Wireless Settings in the navigation tree. STEP 2 Enter the following settings, as needed: • AP Isolation: This feature isolates all wireless clients and wireless devices on your network - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 46
a range of power levels, from Full, Half, Quarter, Eighth, or Min. The default setting is Full. • CTS Protection Mode: CTS (Clear-To-Send) Protection Mode's default setting is Auto. The Router automatically uses CTS Protection Mode when your Wireless-G products are experiencing severe problems and - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 47
can use the WDS page to configure a Wireless Distribution System. This mode allows a wireless client to connect to the Router through an access point, such as WAP54GP or WAP54GPE, when operating in the Repeater Mode. You can install up to three repeaters. NOTE WDS works only with SSID1. Make sure - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 48
: Choose this option to automatically allow access from an access point that is operating in Repeater Mode. • Manual: Choose this option if you want to allow access only from specified access points. Then enter the MAC address of up to three access points. Alternatively, click the Site Survey button - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 49
Enabling Port Forwarding to Allow Access to Services, page 51 • Using Port Triggering to Allow Access to Applications, page 54 • Configuring a DMZ to Allow Access to All Ports of a Server, page 55 • Restricting Users' Access to the Internet, page 57 • Blocking Web Access with URL Filtering, page 59 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 50
as needed: • DoS Prevention: Denial of Service (DoS) Prevention checks incoming packets before allowing select Disabled. This feature is enabled by default. • Block Anonymous Internet Requests: This disable it. This feature is enabled by default. • Block Multicast: Multicasting allows a transmission - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 51
downloaded by a web browser. Uncheck the box to allow cookies. STEP 3 Click Save to save your settings, or click Cancel to refresh the page with the previously saved settings. Enabling Port Forwarding to Allow Access to Services By default, the Router's firewall prevents access Internet access to - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 52
Services 4 When users send this type of request to your network via the Internet, the Router forwards those requests to the appropriate PC. Any PC whose port is being forwarded must have its DHCP client function disabled and must have a new static IP address assigned to it because its IP address - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 53
the Firewall Enabling Port Forwarding to Allow Access to Services 4 STEP 1 Click Firewall > Port in the range. • Protocol: Enter the protocol used for this application. The options are TCP, UDP, or Both. • IP Address: For each application, enter the IP Address of the WRV210 Administration Guide 53 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 54
Port Triggering to Allow Access to Applications Port Triggering is used for special Internet applications that use different ports to transmit and receiving data. For this feature, the Router watches outgoing data for specific port numbers. The Router remembers the IP address of the computer that - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 55
, Port Range Forwarding can forward to a maximum of 10 ranges of ports on different PCs, while a DMZ can forward all the ports for one PC.For information about Port Forwarding, see Enabling Port Forwarding to Allow Access to Services, page 51. Cisco Small Business WRV210 Administration Guide 55 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 56
to Allow Access to All Ports of a Server 4 STEP 1 Click Firewall > DMZ in the navigation tree. STEP 2 In the Software DMZ, click Enabled. NOTE You can disable a DMZ at any time by clicking Disabled and saving the settings. STEP 3 Enter the IP address of the PC that hosts the service that you want - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 57
Configuring the Firewall Restricting Users' Access to the Internet 4 Restricting Users' Access to the Internet By default, the Router's firewall allows your users to access the Internet. You can use the Access Restriction page to block or allow specific kinds of Internet usage and traffic during - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 58
to disable it. Policies are disabled by default. • Enter Policy Name: Type a name to identify the policy. After you save the policy, this name will appear with the policy number in the Internet Access Policy drop-down list. • IP Address: Enter the IP address that will be affected by this policy - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 59
with URL Filtering You can use the Firewall > URL Filtering page to block access to specified websites. STEP 1 Click Firewall > URL Filtering in the navigation tree. STEP 2 From , and then click Delete. To view all the policies, click Summary. Cisco Small Business WRV210 Administration Guide 59 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 60
default. • Enter Policy Name: Type a name to identify the policy. After you save the policy, this name will appear with the policy number in the Internet Access Policy drop-down list. • Start IP Address and End IP Address: Enter the IP address . Cisco Small Business WRV210 Administration Guide 60 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 61
the following sections: • "Managing the VPN Users and Certificates" on page 61 • "Configuring VPN VPN Tunnels" on page 73 Managing the VPN Users and Certificates The Router offers a QuickVPN Client utility Access page to manage the VPN users and to generate certificates for added - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 62
Configuring a Virtual Private Network (VPN) Managing the VPN Users and Certificates 5 Refer to the following topics: • Managing the VPN Users, page 63 • Managing VPN Certificates, page 65 Cisco Small Business WRV210 Administration Guide 62 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 63
the VPN Users The Router supports up to 10 remote users. They use QuickVPN software to connect to your local network through the VPN tunnel. STEP 1 Click VPN > VPN Client Access in the navigation tree. STEP 2 To add a user, enter the username and password, and then click Add/Save. • User Name: Enter - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 64
Utility, close your web browser, reopen it, and enter the new IP address. STEP 4 To manage existing users, perform the following tasks: • To update the username or password: Find the username in the table, and then click Edit. • To delete a user: Find the username in the table, and then click Remove - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 65
Certificates are used if you want additional security beyond the user name and password. The certificate must be installed on the client PC. safe place as a backup. If the router's configuration is reset to the factory default, this certificate can be imported and restored on the router. Guide 65 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 66
the Router. To disable IPSec Passthrough, select Disabled. • PPTP Passthrough: Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-Point Protocol (PPP) to be tunneled through an IP network. PPTP Passthrough is enabled by default. To disable it, select Disabled. Cisco Small Business WRV210 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 67
Configuring VPN Passthrough 5 • L2TP Passthrough: Layer 2 Tunneling Protocol is the method used to enable Point-to-Point sessions via the Internet on the Layer 2 level. L2TP Passthrough is enabled by default. To disable L2TP Passthrough, select Disabled. STEP 3 Click Save to save your settings, or - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 68
IPSec VPN to connect two offices of your company that are in different locations. You can configure up to 5 tunnels. Cisco Small Business WRV210 Administration Guide 68 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 69
> IPSec VPN 5 NOTE Repeat this procedure for each tunnel that to Any. If you want to limit access to specified IP addresses, click the Advanced Settings button. IPSec -Traversal Advanced Settings window, click By Manual Setting. Then enter each IP address and mask. Click the Enabled box to - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 70
0 for the last set of IP Address, as in the following example: 192.168.1.0. • Host: Terminates VPN at the Router, instead of the PC. Use Port Range Forwarding to direct traffic to the correct computer. For more information, see "Enabling Port Forwarding to Allow Access to Services" on page 51. • Any - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 71
Operation Mode: Use this option to set the operation mode to Main (default) or Aggressive. Main Mode operation is supported in ISAKMP SA establishment. • ISAKMP Encryption Method: There are four different may choose to disable authentication. Cisco Small Business WRV210 Administration Guide 71 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 72
. The default is 3600 IP address is blocked. This feature is enabled by default. You can uncheck the box if you want to disable this feature. • Anti-replay: This feature protects the Router from anti-replay attacks, when people try to capture your authentication packets in an attempt to gain access - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 73
VPN Tunnels Use the VPN Summary page to review the settings and monitor the status of all IPSec gateway. If the preconfigured type is IP Addr., the field displays the IP address of remote gateway. If the pre of the remote group is IP Addr., the field displays the IP address of the remote peer. If - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 74
the preconfigured type of local group is IP Addr., the field displays the IP address of the local peer. If the on the previous actions you have performed. For troubleshooting, you can click the button to start, stop update the page with current VPN status information. Cisco - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 75
6 Configuring Quality of Service (QoS) Quality of Service (QoS) ensures better service to high-priority service. Use the QoS module to configure the Router's QoS settings. • Configuring QoS Settings page 76 • "Bandwidth Allocation QoS" on page 77 Cisco Small Business WRV210 Administration Guide 75 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 76
Configuring Quality of Service (QoS) Configuring QoS Settings for Specified Applications 6 Priority Queue QoS Type With the Priority Queue option, you can your settings, or click Cancel to refresh the page with the previously saved settings. Cisco Small Business WRV210 Administration Guide 76 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 77
4 Optionally, if you want to configure advanced policies, click User Define. You can configure up to 5 policies. • Specify the source IP address or the destination IP address, the subnet mask, and the protocol. • Specify the port range, the Bandwidth Allocation Policy (Spare or Guaranteed), and the - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 78
QoS Settings for Specified Ports 6 Configuring QoS Settings for Specified Ports Port-based QoS ensures better service to specified LAN ports. For example, if there is an email server connected to a particular and this setting cannot be changed. Cisco Small Business WRV210 Administration Guide 78 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 79
Configuring Quality of Service (QoS) Configuring QoS Settings for Specified , 32Mbps, Full (highest), or no rate control. Full is the default. • Egress Rate: This setting lets the user choose the output data rate for a port. Packets exceeding this rate Small Business WRV210 Administration Guide 79 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 80
• Reverting to the Factory Default Settings, page 91 • Upgrading the Firmware, page 92 • Rebooting the Router, page 94 Managing Access and Configuring Other Management Options Use the Administration > Management page to reset the admin password, control access to the Configuration Utility, configure - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 81
Administration Managing Access and Configuring Other Management Options 7 Resetting the Admin Password To ensure the Router's security, you are prompted for your password when you access the Router's Configuration Utility. The default user name and password is admin. You should change this setting - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 82
WAN Access to the Configuration Utility With the default settings, the Configuration Utility can be accessed only from a computer that is physically connected to one of the Router's LAN ports. You can adjust the LAN access to enable access through a wireless connection, and enable WAN access from - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 83
. Otherwise, keep the default setting, Disabled. This option is available only if the Remote Management feature enabled. • Allow Remote IP Address: If you enabled Remote Management, you can allow access from any IP address, from a single IP address, or from a range of IP addresses. Choose one of the - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 84
: • SNMP: To enable SNMP, check the Enabled box. To disable this feature, click Disabled. • SNMP: Select Enable if you wish to use SNMP. To use SNMP, you need SNMP software on your PC. • Contact: Enter the contact information for the Router. Cisco Small Business WRV210 Administration Guide 84 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 85
Enter the SNMP community name for SNMP "Set" commands. • SNMP Trap-Community: Enter the SNMP community name for SNMP "Trap" commands. • SNMP Trusted Host: Enter the IP address of the machine where you are running the SNMP software. • SNMP Trap-Destination: Enter the IP address of the SNMP Manager to - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 86
Access : Click Backup Configuration. When the File Download window appears, click Save. Find the location and then click Save. A message appears when the download is complete. The file is a .bin file Rebooting... Please wait. When the Basic Setup page appears, the process is finished. STEP - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 87
of events: • ACL: A violation of an access policy, as set on the Wireless > Wireless Network Access page • DoS: A Denial of Service attack, assuming that DoS prevention is enabled on the is allowed into the private network through this service Cisco Small Business WRV210 Administration Guide 87 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 88
not wish to keep a log. This feature requires the installation of an external log viewer or syslog viewer on your PC. If you enable the system of event that you want to include in the log. - Logviewer IP Address: Enter the address where you want the system log to be sent. - Event Types: Guide 88 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 89
with an echo reply. If there is no connectivity to the device, the request times out. a. Enter the following information: • IP or URL Address: Enter the IP address or URL address of the network device whose connection status you wish to test. • Packet Size: Enter the size of the ping packets, in - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 90
Close to return to the Administration > Diagnostics page. Traceroute Test: a. In the IP or URL Address field, enter the IP or URL address of the network device whose performance you wish to test. b. Click Start to the previously saved settings. Cisco Small Business WRV210 Administration Guide 90 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 91
you to restore the Router's configuration to its factory default settings. NOTE Do not restore the factory defaults unless you are having difficulties with the Router and have exhausted all other troubleshooting measures. After the Router is reset, you have to re-enter all of your configuration - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 92
Upgrading the Firmware 7 Upgrading the Firmware Use the Administration > Firmware Upgrade page to upgrade the Router's firmware. Do not upgrade the firmware unless you are experiencing problems with the Router or the new firmware has a feature you want to use. NOTE If you upgrade the firmware - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 93
address: tools.cisco.com/support/downloads b. When prompted, enter your Cisco online login. c. In the Software Search box, enter WRV210. Click Go. d. Follow the instructions to find the latest firmware and download it to your PC. STEP 3 Perform the upgrade: a. Click Administration > Firmware Upgrade - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 94
> Reboot page allows you to restart the Router without losing any of its stored settings. You may wish to reboot the router during remote troubleshooting. STEP 1 Click Administration > Reboot in the navigation tree. STEP 2 To reboot the router, click Yes to confirm and then click Save. If you do - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 95
Use the Status module to monitor your network. • Monitoring the Router Status, page 96 • Monitoring the LAN, page 97 • Monitoring the Wireless Network, page 99 • Monitoring the System Performance, page 100 • Monitoring the QuickVPN Clients, page 102 Cisco Small Business WRV210 Administration - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 96
version and date of the software • Current Time: The current time • System Up Time: The time elapsed since the last system reboot • MAC Address: The MAC Address of the Router's Internet interface • Host Name: The host name that was entered on the Basic Setup page, if applicable • Domain Name - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 97
Type: The Internet connection type • IP Address: The Router's Internet IP Address • Subnet Mask and Default Gateway: The Router's Subnet Mask and Default Gateway address for DHCP and static IP connections • DNS: The DNS (Domain Name Server) IP addresses currently used by the Router • Release - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 98
Addresses, MAC Addresses, and length of time until a computer's assigned IP address expires. Click Close to return to the Local Network page. Click Refresh to update the information. • Refresh: Click this button to update the on-screen information. Cisco Small Business WRV210 Administration Guide - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 99
SSID of your network • MAC Address: The MAC Address of the SSID listed in the table and on your network • Security Mode: The type of wireless security that is used by the Router • WMM: The status of the Router's WMM feature: Enabled or Disabled Cisco Small Business WRV210 Administration Guide 99 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 100
update the on-screen information. Monitoring the System Performance The Status > System Performance page displays status information about network traffic for the Internet, wireless seconds. Internet/Wireless: Statistics for the network traffic on the Internet connection and wireless connectivity are - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 101
bytes sent • Error Packets Received: The number of error packets received • Dropped Packets Received: The number of dropped packets received • Refresh: Click this button to update the on-screen information. Cisco Small Business WRV210 Administration - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 102
lasted • Disconnect: Check the Disconnect box for each VPN client that you want to disconnect. Then click the Disconnect button. • Refresh: Click this button to update the on-screen information. Cisco Small Business WRV210 Administration - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 103
Operating System Performance NAT Throughput IPSec Throughput Setup/Config User Interface Management SNMP Version Event Logging Details WRV210 IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, 802.1x (Security Authentication), 802.11i (Security WPA2), 802.11e (Wireless QoS) One Power port (12V 1A - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 104
Specifications A Feature Details Firmware Upgrade Firmware Upgradeable Through Web Browser and TFTP Utility Diagnostics Flash, RAM, LAN, WLAN Wireless Spec/Modulation Radio and Modulation Type: 802.11b/DSSS, 802.11g/ ODFM Supported Data Rates 802.11b: 1, 2, 5.5, 11 Mbps 802.11g: 6, 9, 11, - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 105
operate on predefined schedules Wireless VLAN Map Supports SSID-to-VLAN Mapping with Wireless Client Isolation WDS Allows Wireless Signals to be Repeated by up to 3 Repeaters DMZ Host A LAN PC can be configured as a DMZ Host PPPoE Dual PPPoE User Profiles ALG Support FTP, PPTP, L2TP, IPSec - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 106
ºF (0 to 40ºC) Storage Temp. -4 to 158ºF (-20 to 70ºC) Operating Humidity 10 to 85% Noncondensing Storage Humidity 5 to 90% Noncondensing A Cisco Small Business WRV210 Administration Guide 106 - Linksys WAP54GPE | Cisco Small Business WRV210 Administration Guide - Page 107
Community www.cisco.com/go/smallbizsupport Online Technical Support www.cisco.com/support and Documentation (Login Required) Phone Support Contacts www.cisco.com/en/US/support/tsd_cisco_small_ business_support_ center_contacts.html Software Downloads (Login Required) Go to tools.cisco.com
Cisco Small Business
WRV210 Wireless-G VPN Router with RangeBooster
ADMINISTRATION
GUIDE