Linksys WEC600N User Guide - Page 8

Chapter 3 4. The Adapter connects to the network. Configuration Wireless Network Status The Wireless Network Status screen provides information on your current network settings. Connecting to the Network 5. Click Print to print out your wireless network settings. Then click Finish to return to the Status screen, or click Exit to exit the Monitor. Congratulations Congratulations! The Adapter is connected to the network. Dual-Band Wireless-N ExpressCard Wireless Network Status Radio Band This is the radio band used on the network. Wireless Network Name This is the unique name (SSID) of the wireless network. Wireless Mode This is the mode of the wireless network currently in use. Wide Channel This is the Wireless-N primary channel used with a 40 MHz radio band network. Standard Channel This is the channel used by your wireless network. Security This is the status of the wireless security feature. Authentication This is your wireless network's authentication method. Network Type This is the wireless network type. IP Address This is the IP Address of the Adapter. Subnet Mask This is the Adapter's Subnet Mask. Default Gateway This is the Default Gateway address. DNS1 This is the address of the DNS server used by the Adapter. MAC Address This is the MAC address of the wireless network's wireless router or access point. Signal Strength The Signal Strength bar indicates the signal strength. Link Quality The Link Quality bar indicates the quality of the wireless network connection. Click Statistics to go to the Wireless Network Statistics screen. Click Back to return to the initial Status screen. Click Save to Profile to save the currently active connection settings to a profile. 7