Linksys WGA600N User Guide - Page 9
Passphrase, WEP Key, TX Key, Network Settings, Link Status - support
UPC - 745883582730
View all Linksys WGA600N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Chapter 3 • High Security (WPA/WPA2) If your network uses WPA/WPA2 security, enter the passphrase in the Passphrase field and click Next. Setup Wizard Advanced Options Authentication Selecttheappropriateauthentication method used to access the network. The default setting is Auto. NOTE: WEP is not supported by Draft 11N specifications. If your network uses WEP, the Adapter will only operate in 802.11B/G modes. 14. The Network Settings screen will appear. Verify the network settings and click Next to continue or Back to modify the settings. WPA/WPA2 Passphrase Passphrase Enter the network passphrase, this can used any numbers or characters and must be between 8 and 63 characters in length. • Better Compatibility with Legacy Devices (WEP) If your network uses WEP security, enter the necessary information in the appropriate fields and click Next. Network Settings 15. The Link Status screen will appear, click Next. WEP Settings WEP Select a level of WEP encryption, 64 bits (10 hex digits) or 128 bits (26 hex digits). Passphrase The passphrase is case-sensitive and should be no more than 16 characters in length. WEP Key Enter the WEP key used to access the network. This is defined on the access point or router that you are connecting to. TX Key Select the transmit key used to access the network. The default value is 1. Dual-Band Wireless-N Gaming Adapter Link Status