Linksys WSB24 Quick Installation Guide - Page 1

Instant Wireless® Wireless Signal Booster WSB24 Minimum Requirements • One of the following Linksys products: Wireless Access Point, WAP11 Wireless Router, BEFW11S4 Package Contents • One Linksys Wireless Signal Booster • Two Signal Booster Cables • One Power Adapter • One Quick Installation guide Note: The images in this document show the Wireless Signal Booster being connected to an Access Point; the same directions can be followed when connecting the Wireless Signal Booster to a wireless Router. Connecting the Wireless Signal Booster to Your Linksys Access Point/Router A. With your Access Point/Router powered off, place the Wireless Signal Booster on top of the Access Point/Router. B. Disconnect the Access Point's/Router's antennas. B D. Connect the antennas to the Wireless Signal Booster's antenna ports. D E. Connect the appropriate power adapters to both the Access Point/Router and Wireless Signal Booster. C. Connect the Signal Booster Cables from the Access Point's/Router's antenna ports to the Wireless Signal Booster's cable ports. The Wireless Signal Booster with Access Point C E F. Now you are ready to use the Wireless Signal Booster in your wireless network. QI-WSB24-10/25/02NC BW WWW.LINKS YS .C O M