Linksys WVC11B User Guide - Page 48

Wireless-B Internet Video Camera 1. Click the View Video tab on the Welcome screen. 2. A Security Warning screen about an OCX plug-in may appear (see Figure 8-3). To enable your computer to see the Camera's video, click the Yes button. 3. A screen will appear showing you the video from the Camera. Note: To view video using a web browser, you must use Internet Explorer version 5.5 or higher. The View Video feature will not work with Netscape. Netscape users should use the Viewer & Recorder Utility instead. Setup Click the Setup tab on the Welcome screen to alter the Camera's settings. A password request page, shown in Figure 8-4 will pop up. (Windows XP users will see a similar screen.) Enter admin (the default user name and password) in the User Name and Password fields. Then click the OK button. Note: For added security, you should always change the Login Name and Password through the Password screen of the Utility. The Basic screen will appear. You have six tabs available: • Basic. To configure the Camera's basic, LAN, and wireless settings, use the Basic screen. • Image. Customize the video settings on the Image screen. • Password. Alter the Administrator name and password on the Password screen. • Users. Designate users and their level of access to the Camera on this screen. • SoloLink DDNS. Set up and manage the SoloLink DDNS Service. DDNS (Dynamic Domain Name System) lets you assign a fixed host and domain name to a dynamic Internet IP address. • Status. Status information and a log are displayed on this screen. • Advanced. The e-mail alert options and Universal Plug and Play (UPnP) settings are configured on the Advanced screen. To save your changes, click the Apply button. To cancel any unsaved changes, click the Cancel button. To get additional information about a screen's features, click the Help button. Chapter 8: Using The Wireless-B Internet Video Camera's Web-based Utility Setup Figure 8-3: Security Warning Figure 8-4: User Name and Password 41