Logitech QuickCam Ultra Vision User Guide - Page 3
Position Your Camera, Microphone, and Speakers, The Audio Tuning Wizard, Install the Software First
View all Logitech QuickCam Ultra Vision manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Logitech® QuickCam® Ultra Vision User's Guide 2 Install the Software First Install the software before plugging in your camera. Note Many of your camera's features require the software to be installed for proper operation. 3 Connect Your Camera to Your Computer Wait until prompted by the software, and then connect your camera to an available USB port on your computer. English Logitech® QuickCam® Ultra Vision User's Guide 4 Position Your Camera, Microphone, and Speakers Your camera comes with Logitech® RightSound™ echo-cancellation technology. The following steps will ensure the best possible audio performance: 1. Position your camera in the middle of your monitor for optimal eye contact. 2. Position your camera's microphone no more than 3 feet (1 m) away from you and point it toward you. 3. Position your speakers (if used) at least 12 inches (30 cm) away from your microphone to reduce feedback, and then angle your speakers away from your microphone. Tip Do not place objects between you and the microphone. 5 The Audio Tuning Wizard The first time that you start QuickCam®, you are guided through the Microphone/Speaker Setup Utility and Audio Tuning Wizard that lets you do the following: • Select the audio input device (microphone) and audio output device (speakers). • Enable Acoustic Echo Cancellation (AEC)- recommended. • Specify mic rophone input volume and speaker output volume. • Test audio settings. Tip To change these settings later, in the QuickCam® software, click the Settings button and then click the Audio tab. English