Logitech Squeezebox Boom Quick Start Guide - Page 12
Set up Squeezebox Boom and connect it to your, network - adapter
View all Logitech Squeezebox Boom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Logitech Squeezebox Boom Set up Squeezebox Boom and connect it to your network 1. Slide open the battery compartment door on the remote to expose the battery, peel the protective tab from the battery, and then close the battery compartment door. 2. Optional: If you'd prefer to connect to your network using a wired connection, connect your own ethernet cable now. 3. Slide the plug adapter into the power supply and make sure it snaps into place. Plug the barrel connector into the AC input on Squeezebox Boom's rear panel. 4. Plug the power supply into an electrical outlet. Squeezebox Boom will automatically power on. 5. Press RIGHT on the remote, or press the scroll wheel on the front panel. (As covered in Getting to know Squeezebox Boom, the UP and DOWN buttons on the remote perform the same function as turning the wheel left or right. Pressing RIGHT on the remote performs the same function as clicking the wheel. For the rest of this section, we'll refer to using the various buttons on the remote, but you can use the scroll wheel as well.) 6. You'll see a menu giving you the choice of connecting via a wired or wireless network. Use the UP and DOWN buttons to make your selection, and press RIGHT. 12