Logitech Webcam Pro 9000 Manual - Page 3
Connect Your Camera to Your Computer, Position Your Camera, Microphone, and Speakers, The Audio - software
View all Logitech Webcam Pro 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 Connect Your Camera to Your Computer Wait until you are prompted by the software before connecting your camera to an available USB port on your computer. 4 Position Your Camera, Microphone, and Speakers Your camera comes with Logitech® RightSound™ Technology. RightSound™ Technology cancels echo and significantly reduces background noise. The following steps will ensure the best possible audio performance: • Position your camera in the middle of your monitor for optimal eye contact. • Position your camera's microphone no more than 3 feet (1 m) away from you and point it toward you. • Position your speakers (if used) at least 12 inches (30 cm) away from your microphone to reduce feedback, and then angle your speakers away from your microphone. Tip Do not place objects between you and the microphone. QuickCam® Pro 9000 5 The Audio Tuning Wizard The first time that you start QuickCam, you are guided through the Microphone/Speaker Setup Utility and Audio Tuning Wizard that lets you do the following: • Select the audio input device (microphone) and audio output device (speakers). • Enable Acoustic Echo Cancellation (AEC)-recommended. • Enable background suppression-recommended. • Specify microphone input volume and speaker output volume. • Test audio settings. In situations with loud and irregular background noise, your voice can become distorted when using noise suppression. If this occurs, disable noise suppression in the QuickCam® software. Tip To change your audio settings in the QuickCam® software, click the Settings button, and then click the Audio tab. QuickCam® Pro 9000