Lowrance FishHunter 3D FishHunter Operator Manual - Page 11
FishHunter Wi-Fi XXX, Sonar
View all Lowrance FishHunter 3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
your coverage area. 3. Ensure you have charged your FishHunter for minimum of 4 hours before first usage. 4. Attach your FishHunter to the braided line on the end of your fishing line or tether it to the red leash that was provided in your box. Tether it by threading the red leash through the tow point on the front of your FishHunter or by attaching the line tying clip onto the front of your sonar and the end of the red leash provided. 5. Drop the FishHunter into the water. 6. The sonar will automatically turn on when placed in water and will begin slowly flashing red from the top of the sonar. If you don't see any lights then the FishHunter is not charged. 7. Open your Wi-Fi settings on your smartphone or tablet. Refresh the list and select FishHunter Wi-Fi XXX. ¼¼ Note: It may take up to 1 minute to appear. 8. Wait for your phone/tablet to tell you that you are connected to FishHunter Wi-Fi. You will see a check mark on your Wi-Fi settings to show you are connected. ¼¼ Note: Other phones or tablets can cause connection errors. Ensure their Wi-Fi settings are turned off. 9. Once connected, open theFishHunter app and go to the Sonar section. Overview | FishHunter 3D/PRO Operator Manual | 11