Lowrance HDS-5 Gen2 Quick Start Guide - Page 6

Go To Cursor / Cancel Navigation - maps

Get Lowrance HDS-5 Gen2 PDF manuals and user guides View all Lowrance HDS-5 Gen2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Waypoints To Create Waypoint at current position: 1. Press the WPT/Find key to create a waypoint at the your current position. To Create Waypoint at the cursor position on Chart page: 1. Place the cursor on the Chart page where you want to set the waypoint and press the ENTER. 2. Select Save from the New Waypoint menu and press Enter. Go To Cursor / Cancel Navigation To Navigate to the cursor: 1. From the Chart page, center the cursor over a point of interest. Press the MENU key. 2. Select Go to Cursor and press ENTER. To cancel navigation: 1. From the Chart menu select Navigation and press ENTER. 2. Select Cancel and press Enter. MMC/SD card slot The MMC/SD card slot allows you to view mapping charts and save/view route, trail and sonar log data. Make sure the MMC card slot door is always closed to help prevent moisture from getting into the card slot compartment. To prevent damage to the card slots, use care when inserting cards in the card slots. *988-10064-001*

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
To Navigate to the cursor:
From the Chart page, center the
1.
cursor over a point of interest.
Press the
MENU
key.
Select
2.
Go to Cursor
and press
ENTER
.
To cancel navigation:
From the Chart menu select
1.
Navigation
and press
ENTER
.
Select
2.
Cancel
and press
ENTER
.
Go To Cursor / Cancel Navigation
MMC/SD card slot
The MMC/SD card slot allows you to view
mapping charts and save/view route, trail and
sonar log data.
Make sure the MMC card slot door is always
closed to help prevent moisture from getting
into the card slot compartment. To prevent
damage to the card slots, use care when insert-
ing cards in the card slots.
*988-10064-001*
To Create Waypoint at current position:
Press the
1.
WPT/Find
key to create a waypoint at the your current
position.
To Create Waypoint at the cursor position on Chart page:
Place the cursor on the Chart
1.
page where you want to set the
waypoint and press the
ENTER
.
Select
2.
Save
from
the
New
Waypoint
menu
and
press
ENTER
.
Waypoints