Lowrance HDS-7 Carbon Installation Manual EN - Page 63
Connecting a smartphone, Always, Access Point, Wireless devices, Internal Access Point
View all Lowrance HDS-7 Carbon manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
appear, follow the on screen instructions to manually find the device. 6. Select the graphic icon of the unit. The unit displays a prompt similar to the following: 7. Select Yes for one-time connection, or Always if device is to be remembered for regular connection. This setting can be changed later if required. Ú Note: The internal wireless module only supports GoFree connection to itself. Other units connected on the network are not visible. Connecting a smartphone Install the GoFree App on the smartphone before following this procedure. 1. Set the internal wireless to Access Point mode. To do this, select the Wireless devices page in the Wireless settings dialog and then select the unit's Internal Wireless. Next, select the Mode option and then select Internal Access Point. 2. Select a device on the Wireless devices page to view its Network Key. 3. Navigate to the wireless network connection page on the smartphone, and find the unit or GoFree wireless xxxx network. If more than one is in range, review the Wireless devices page from the unit's Wireless settings dialog to confirm which wireless device is connected to the unit. 4. Enter the Network Key in the smartphone to connect to the network. 5. Open the GoFree application on the smartphone, the unit should be automatically detected. The name displayed will be either the default, or that assigned in the Device Name setting. If the unit does not appear, follow the on screen instructions to manually find the device. The MFD's display is shown on the smartphone. To change the MFD's display on the smartphone, use the MFD to change the display on the MFD. The display change on the MFD is reflected on the smartphone. Software Setup | HDS Carbon Installation Manual 63