Lowrance HDS-7 Gen2 Touch HDS Gen2 Touch 2.5 software release addendum - EN - Page 6

Calibrate With the Point 1 mounted securely in its permanent location, follow the on-screen instructions to calibrate the compass. GoFree™ wireless With a WIFI-1 unit connected to an HDS unit you can use a wireless device to view or remotely control the HDS display. Displaying HDS data on a wireless device requires a corresponding app. Please check the appropriate Apple or Android store for your device. ¼¼ Note: In this document we have used the term wireless devices, and graphics from iPad and app Store are used as examples. The wireless functionality, however, is provided for other vendor's tablets or smartphones. Tablets can be used for viewing and controlling the HDS unit when relevant apps are available. Smartphones can only be used as an HDS viewer. ¼¼ Note: Installation and wiring for the WIFI-1 unit is described in the separate WIFI-1 Installation Guide. ¼¼ Note: GoFree wireless is not compatible with HDS Gen1 units. If an HDS Gen1 unit is on the same network as a GoFree module, networking will no longer be functional. Setting HDS device name You will only need to change your unit's name when HDS units on the network have the same default device name. Setting up the WIFI-1 Connect the WIFI-1 unit to the HDS unit with the Ethernet cable supplied with the WIFI-1 unit -- The WIFI-1 access point will now be listed in the HDS Network menu 6 |