Lowrance Link-9 VHF Radio Link-9 User Guide - Page 27
DSC/ATIS setup, DSC function, User MMSI, ATIS function EU ATIS radios only
View all Lowrance Link-9 VHF Radio manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
DSC/ATIS setup DSC function It's recommended DSC functionality is always enabled, unless operating the vessel in an ATIS region. An MMSI number must be entered in radio before the DSC function can be enabled. When enabled, the symbol is displayed. User MMSI Enter an MMSI number to access the radio's DSC functionality. This unique identifier must be supplied a local radio spectrum authority. DO NOT enter a random 'made up' number. ¼ Note: Contact a Lowrance dealer if you need to change your MMSI after initial input. ATIS function (EU ATIS radios only) ATIS must be enabled when navigating inland waterways in signatory countries of the RAINWAT agreement. It should NOT be used outside these regions. DSC functionality is not possible when ATIS is turned on. When enabled, the symbol is displayed. Sea/Inland use (EU ATIS radios only) Toggles between DSC (Sea) and ATIS (Inland) modes. Does not allow both to be selected at the same time. ATIS ID (EU ATIS radios only) Enter an ATIS number to access the radio's ATIS functionality. This unique identifier must be supplied a local radio spectrum authority. DO NOT enter a random 'made up' number. ¼ Note: Contact a Lowrance dealer if you need to change your ATIS ID after initial input. Individual acknowledge The radio can be configured to automatically acknowledge an incoming 'individual' call, or require manual intervention: Auto After a 15 second delay, radio will switch to requested channel, and send an automatic acknowledgement, ready for conversation. US country mode default. Radio menus | Link-9 User Guide | 27