Lowrance StructureScan HD Transom Installation Manual - Page 15
Toggle the Flip Left/Right feature
 |
View all Lowrance StructureScan HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
StructureScan Troubleshooting Tips • Make sure StructureScan HD is powered StructureScan not displayed • Check unit software; must have at least version 2.5 • Make sure yellow wire is connected to switched power source • Check fuse No Data Check range or turn on auto range Data washed out/ same color Turn down contrast; try different palettes Left/right data swapped on screen Toggle the Flip Left/Right feature No Source is displayed • Make sure HDS unit and StructureScan are powered and connected to ethernet network • Make sure all switches are powered • Check link/active light to see which units are not communicating | 15
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10 -
11 -
12 -
13 -
14 -
15 -
16
 |
 |
| 15
StructureScan Troubleshooting Tips
StructureScan not
displayed
•
Make sure StructureScan HD is pow-
ered
•
Check unit software; must have at least
version 2.5
•
Make sure yellow wire is connected to
switched power source
•
Check fuse
No Data
Check range or turn on auto range
Data washed out/
same color
Turn down contrast; try different palettes
Left/right data
swapped on screen
Toggle the Flip Left/Right feature
No Source
is
displayed
•
Make sure HDS unit and StructureScan
are powered and connected to ether-
net network
•
Make sure all switches are powered
•
Check link/active light to see which
units are not communicating