MSI IM-GM45 User Guide - Page 44

Primary/Secondary/Third/Fourth IDE Master, Fifth IDE Master/Slave

Get MSI IM-GM45 - Motherboard - Mini ITX PDF manuals and user guides
UPC - 816909048575
View all MSI IM-GM45 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

MS-9818 Mainboard IDE Configuration M irrored IDER Configuration This setting enables/disables the mirrored IDE RAID drive. SATA#1 Configuration This setting specifies the operation mode of SATA ports. Configure SATA#1 as This setting specifies the function of the on-chip SATA controller. Primary/Secondary/Third/Fourth IDE Master, Fifth IDE Master/Slave [Type] Press PgUp/ or PgDn/ to select [Manual], [None] or [Auto] type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If your hard disk drive type is not matched or listed, you can use [Manual] to define your own drive type manually. [LBA/Large Mode] Enabling LBA causes Logical Block Ad- dressing to be used in place of Cylinders, Heads and Sectors [Block(Multi-Sector Transfer)] Any selection except Disabled determines the number of sectors transferred per block [PIO Mode] Indicates the type of PIO (Programmed Input/ Output) 3-8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
3-8
MS-9818 Mainboard
IDE Configuration
Mirrored IDER Configuration
This setting enables/disables the mirrored IDE RAID drive.
SATA#1 Configuration
This setting specifies the operation mode of SATA ports.
Configure SATA#1 as
This setting specifies the function of the on-chip SATA controller.
Primary/Secondary/Third/Fourth IDE Master, Fifth IDE Master/Slave
[Type]
Press PgUp/<+> or PgDn/<-> to select
[Manual], [None] or [Auto] type. Note that the
specifications of your drive must match with
the drive table. The hard disk will not work
properly if you enter improper information for
this category. If your hard disk drive type is
not matched or listed, you can use [Manual] to
define your own drive type manually.
[LBA/Large Mode]
Enabling LBA causes Logical Block Ad-
dressing to be used in place of Cylinders,
Heads and Sectors
[Block(Multi-Sector Transfer)]
Any selection except Disabled determines
the number of sectors transferred per block
[PIO Mode]
Indicates the type of PIO (Programmed Input/
Output)