MSI K9VGM-V User Guide - Page 11
Memory - bios
UPC - 816909035025
View all MSI K9VGM-V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2. Then press down the other end of the clip to fasten the cooling set on the top of the retention mechanism. Locate the Fix Lever and lift up it. 3. Fasten down the lever. 4. Attach the CPU Fan cable to the CPU fan connector on the mainboard. MSI Reminds You... 1. Confirm if your CPU cooler is firmly installed before turning on your system. 2. Check the information in PC Health Status of H/W Monitor in BIOS for the CPU temperature. 3. Please note that the mating/unmating durability of the CPU is 20 cycles. Therefore we suggest you do not plug/unplug the CPU too often. Memory The mainboard provides two 240-pin unbuffered DDR II 400 / 533 / 667 / 800 DIMM slots, and supports the memory size up to 2GB. To operate properly, at least one DIMM module must be installed. Install at least one DIMM module on the slots. Memory modules can be installed on the slots in any order. You can install either single- or double-sided modules to meet your own needs. Installing DDR II Modules Volt Notch 1. The DDR II slot has only one notch on the center of module. The module will only fit in the right orientation. 2. Insert the memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the DIMM slot. 3. The plastic clip at each side of the DIMM slot will automatically close. 5