MSI MPG Z590 GAMING CARBON WIFI User Manual - Page 37
JDASH1 : Tuning Controller connector, JCI1: Chassis Intrusion Connector
View all MSI MPG Z590 GAMING CARBON WIFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
JDASH1 : Tuning Controller connector This connector is used to connect an optional Tuning Controller module. 6 5 2 1 1 No Pin 2 3 MCU_SMB_SCL_M 4 5 VCC5 6 NC MCU_SMB_SDA_M Ground JCI1: Chassis Intrusion Connector This connector allows you to connect the chassis intrusion switch cable. Normal (default) Trigger the chassis intrusion event Using chassis intrusion detector 1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis. 2. Close the chassis cover. 3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration. 4. Set Chassis Intrusion to Enabled. 5. Press F10 to save and exit and then press the Enter key to select Yes. 6. Once the chassis cover is opened again, a warning message will be displayed on screen when the computer is turned on. Resetting the chassis intrusion warning 1. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration. 2. Set Chassis Intrusion to Reset. 3. Press F10 to save and exit and then press the Enter key to select Yes. Overview of Components 37