MSI Optix MAG271CQR User Manual - Page 22

1st Level Menu 2nd/3rd Level Menu Description Anti Motion Blur (OFF) ■■ Brightness cannot be adjusted when Anti Motion Blur is set to ON. (ON) ■■ When Response Time is set to Fastest with at least 75Hz Screen Refresh Rate, Anti Motion Blur will be automatically enabled. ■■ When Screen Refresh Rate is lower than 75HZ, Anti Motion Blur cannot be enabled and Response Time cannot be set to Fastest. ■■ When Anti Motion Blur is enabled, HDCR cannot be enabled and will be grayed out. ■■ This function is recommended for cinema, FPS and Racing games. ■■ When FreeSync is enabled, Anti Motion Blur will be grayed out. Zero Latency (OFF) (ON) ■■ Zero Latency default is ON. ■■ Zero Latency helps to reduce the signal throughput timing and supports QHD only. Refresh Rate Location Left Top ■■ Users can adjust Refresh Rate in any Mode. Right Top ■■ Default Refresh Rate Location is Left Bottom. Left Bottom Right Bottom Location is adjustable in OSD Menu. Press the Middle Button to confirm and apply your Refresh Rate Location. ■■ This monitor follows and works at the Operating OFF System's preset Screen Refresh Rate. 2-6 ON Alarm Clock Location Left Top ■■ Users can adjust Alarm Clock in any Mode. Right Top Left Bottom Right Bottom ■■ After setting the time, press the Middle Button to activate the timer. ■■ Default Alarm Clock Location is Left Top. Users can select their own location. OFF 15:00 00:01~99:59 30:00 45:00 60:00 Screen Assistance None ■■ Users can adjust Screen Assistance in any Mode. ■■ Screen Assistance default is None. FreeSync (OFF) (ON) ■■ FreeSync prevents screen tearing. ■■ HDMI default is ON but grayed out (cannot be changed). ■■ DisplayPort default is ON and can be adjusted ON/OFF in any mode, any resolution, any input source and any screen refresh rate. ■■ When FreeSync is enabled, Anti Motion Blur will be grayed out.