MSI P43T User Guide

MSI P43T Manual

Get MSI P43T PDF manuals and user guides View all MSI P43T manuals
Add to My Manuals
Save this manual to your list of manuals

MSI P43T manual content summary:

  • MSI P43T | User Guide - Page 1
    P45T-C53/ P45T-C51/ P45T-C41/ P43T-C53/ P43T-C51/ P43T-C41 series MS-7519 (v1.x) Mainboard  G52-75191XB
  • MSI P43T | User Guide - Page 2
    the user's manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance. ◙ Visit the MSI website for FAQ, technical guide, BIOS updates, driver updates, and other information: http://www.msi.com/index.php?func=service
  • MSI P43T | User Guide - Page 3
    MS-7519 Safety Instructions ￭ Always read the safety instructions carefully. ￭ Keep this User's Manual for future reference. ￭ Keep this shock. ￭ If any of the following situations arises, get the equipment checked by service personnel: ◯ The power cord or plug is damaged. ◯ Liquid has penetrated
  • MSI P43T | User Guide - Page 4
    , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, . VOIR LA NOTICE D'INSTALLATION AVANT DE RACCORDER AU RESEAU. Micro-Star International MS-7519 This device complies with Part 15 of the FCC Rules. Operation is subject
  • MSI P43T | User Guide - Page 5
    MS-7519 WEEE (Waste Electrical and Electronic Equipment) Statement ENGLISH To protect the global environment and as an environmentalist, MSI équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au
  • MSI P43T | User Guide - Page 6
    a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Uni recogida de estos residuos. NEDERLANDS Om het milieu te beschermen, wil MSI u eraan herinneren dat.... De richtlijn van de Europese Unie (EU
  • MSI P43T | User Guide - Page 7
    MS-7519 TÜRKÇE Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: Avrupa Birliği ( zelebbi gyűjtőhelyre viheti. ITALIANO Per proteggere l'ambiente, MSI, da sempre amica della natura, ti ricorda che.... In base alla Direttiva dell'Unione Europea (EU) sullo Smaltimento dei
  • MSI P43T | User Guide - Page 8
    ii Revision History ii Technical Support ii Safety Instructions iii FCC-B Radio Frequency Interference Statement iv WEEE (Waste Electrical and Electronic Equipment) Statement v Chapter 1 Getting Started 1-1 Mainboard Specifications 1-2 Mainboard Layout 1-4 Packing Checklist 1-5 Chapter
  • MSI P43T | User Guide - Page 9
    MS-7519 Appendix A Realtek Audio A-1 Installing the Realtek HD Audio Driver A-2 Software Configuration A-4 Hardware Setup A-19 Appendix B Overclocking Center B-1 Activating Overclocking Center B-2 System Info B-3 DOT B-4 ix
  • MSI P43T | User Guide - Page 10
  • MSI P43T | User Guide - Page 11
    / P45T-C41/ P43T-C53/ P43T-C51/ P43T-C41 Series (MS-7519 v1.X) ATX mainboard. The P45T-C53/ P45TC51/ P45T-C41/ P43T-C53/ P43T-C51/ P43T-C41 Series mainboards are based on Intel® P45/ P43 & ICH10 chipsets for optimal system efficiency. Designed to fit the advanced Intel® Core™2 Extreme, Core™2 Quad
  • MSI P43T | User Guide - Page 12
    ▍ Getting Started Mainboard Specifications Processor Support ■ Intel® Core™2 Extreme, Core™2 Quad, Core™2 Duo, Pentium Dual-Core and Cel- eron Dual-Core processor in the LGA775 package *(For the latest information about CPU, please visit http://www.msi.com/index. php?func=cpuform2) FSB ■ 1600 *(OC)/
  • MSI P43T | User Guide - Page 13
    FDD ■ 1 floppy port ■ Supports 1 FDD with 360 KB, 720 KB, 1.2 MB, 1.44 MB and 2.88 MB Connectors ■ PCI Express 2.0 x1 slots ■ 3 PCI slot, support 3.3V/ 5V PCI bus Interface Form Factor ■ ATX (30.5cm X 22.0 cm) Mounting ■ 6 mounting holes MS-7519 If you need to purchase accessories and request the
  • MSI P43T | User Guide - Page 14
    ▍ Getting Started Mainboard Layout P45T-C53/ P45T-C51/ P45T-C41/ P43T-C53/ P43T-C51/ P43T-C41 Series (MS-7519 v1.X) ATX Mainboard 1-4
  • MSI P43T | User Guide - Page 15
    Packing Checklist MS-7519 MSI mainboard MSI Driver/Utility DVD SATA Cable (Optional) Power Cable Standard Cable for IDE Devices Back IO Shield User's Guide * The pictures are for reference only and may vary from the packing contents of the product you purchased. 1-5
  • MSI P43T | User Guide - Page 16
  • MSI P43T | User Guide - Page 17
    Chapter 2 Hardware Setup This chapter provides you with the information about hardware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not
  • MSI P43T | User Guide - Page 18
    ▍ Hardware Setup Quick Components Guide OC_SW1, p.2-20 CPU, p.2-3 JPWR2, p.2-9 SYSFAN1, p.2-14 CPUFAN, p.2-14 Back Panel, p.2-10 DDR2, p.2-7 SYSFAN2, p.2-14 JPWR1, p.2-9 IDE1, p.2-12 PCIE, p.2-21 PCI, p.2-22 JAUD1, p.2-17 JCD1, p.2-14
  • MSI P43T | User Guide - Page 19
    not recommended. We do not guarantee the damages or risks caused by inadequate operation or beyond product specifications. Introduction to LGA 775 CPU The pin-pad side of LGA 775 CPU. The surface of LGA 775 CPU. Remember to apply some thermal paste on it for better heat dispersion. Alignment Key
  • MSI P43T | User Guide - Page 20
    dispersion. Follow the steps below to install the CPU & cooler correctly. Wrong installation will cause the damage of your CPU & mainboard. 1. The CPU socket has a plastic cap on 2. Remove the cap from lever hinge it to protect the contact from damage. side (as the arrow shows). Before you
  • MSI P43T | User Guide - Page 21
    MS-7519 5. Lift the load lever up and open the load plate. 6. After confirming the CPU direction for correct mating, put down the CPU in the socket housing frame. Be sure to grasp on the edge of the CPU base. Note that the alignment keys are matched. Alignment Key 7. Visually inspect if the CPU
  • MSI P43T | User Guide - Page 22
    are correctly inserted. Mainboard locking switch Hook Important • Read the CPU status in BIOS. • Whenever CPU is not installed, always protect your CPU socket pin with the plastic cap covered (shown in Figure 1) to avoid damaging. • Mainboard photos shown in this section are for demonstration of
  • MSI P43T | User Guide - Page 23
    MS-7519 Memory These DIMM slots are used for installing memory modules. For more information on compatible components, please visit http://www.msi.com/index.php?func=testreport DDR2 240-pin, 1.8V 64x2=128 pin 56x2=112 pin Dual-Channel mode In Dual-Channel mode, the memory modules
  • MSI P43T | User Guide - Page 24
    inserted in the DIMM slot. The plastic clip at each side of the DIMM slot will automatically close when the memory module is properly seated. 3. Manually check if the memory module has been locked in place by the DIMM slot clips at the sides. Notch Volt Important You can barely see
  • MSI P43T | User Guide - Page 25
    MS-7519 Power Supply ATX 24-pin Power Connector: JPWR1 This connector allows you to connect an ATX 24-pin power supply. To connect the ATX 24- .113.2G6V1V.rP7o1.SuG81-n.rO9Gdo2.NurG0o2n#.ruR1do2n.eu+2ds2n5.+3dV2.5+4V5.GVround ATX 4-pin Power Connector: JPWR2 This connector is used to provide power
  • MSI P43T | User Guide - Page 26
    45 LAN jack is for connection to Yellow the Local Area Network (LAN). You can connect a network cable to it. Green/ Orange LED Left Right Color Yellow Green Orange LED State Off On(Steady state) On(brighter & pulsing) Off On On Condition LAN link is not established. LAN link is established. The
  • MSI P43T | User Guide - Page 27
    MS-7519 ▶ Audio Ports These audio connectors are used for audio devices. It is easy to differentiate between audio effects according to the color of audio jacks. ■ Line-In (Blue) - Line In, is used for external CD player, tape-player or other audio devices. ■ Line-Out (Green) - Line Out,
  • MSI P43T | User Guide - Page 28
    3 1/2" F l oppy D i sk D ri ve Connector IDE Connector: IDE1 This connector supports IDE hard disk drives, optical disk drives and other IDE devices. Fl opMpySDI FlopMpySDIFlopMpySDI Kdkldkddfkkakfskkdskkdakaddfdddffdfkad documentation supplied by the vendors for jumper setting instructions. 2-12
  • MSI P43T | User Guide - Page 29
    MS-7519 Serial ATA Connector: SATA1~6 This connector is a high-speed Serial ATA interface port. Each connector can connect to one Serial ATA device. Fl opMpySDI Fl
  • MSI P43T | User Guide - Page 30
    Important • Please refer to the recommended CPU fans at processor's official website or consult the vendors for proper CPU cooling fan. • CPUFAN1 support Smart fan control. You can install Dual Core Center utility that will automatically control the CPUFAN1 speeds according to the actual CPUFAN1
  • MSI P43T | User Guide - Page 31
    MS-7519 Front Panel Connectors: JFP1, JFP2 These connectors are for electrical connection to the front panel switches and LEDs. The JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide. PowPoewr LeEr DSwi2tc.h+41.0-6..N+8o.-Pin JFP1 1.+3.-5.-7.H+9D.RDReLseEesDrevteSdwitch
  • MSI P43T | User Guide - Page 32
    ▍ Hardware Setup Front USB Connector: JUSB1~3 This connector, compliant with Intel® I/O Connectivity Design Guide, is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3 players, printers, modems and the like. 2.V4C.U6C.SU8BS1.
  • MSI P43T | User Guide - Page 33
    MS-7519 S/PDIF-Out Connector: JSP1 This connector is used to connect S/PDIF (Sony & Philips Digital allows you to connect the front panel audio and is compliant with Intel® Front Panel I/O Connectivity Design Guide. 2.G4r.oP6uR.Mn8Ed.1INSC0Eo.DHNPeeCitnaeEdc#tPiohnone Detection 1.M3.IMC5.ILHC7e.RS9a
  • MSI P43T | User Guide - Page 34
    connector: JTPM1 This connector connects to a TPM (Trusted Platform Module) module (optional). Please refer to the TPM security platform manual for more details and usages. 2.34V.36S..3tS8aVe.n15Prd0iVaob1.NlwyP2I1o.eRopG4rwoPQ.rwGeionreurornudnd 1.L3P.L5CP.LCC7P.loLRC9cP.eLka1CsPd1e1ad.CtL3drPea
  • MSI P43T | User Guide - Page 35
    MS-7519 Jumpers Clear CMOS Jumper: JBAT1 There is a CMOS RAM onboard that has a power supply from an external battery to keep the data of system configuration.
  • MSI P43T | User Guide - Page 36
    the use of switch. Hardware Overclock FSB Switch: OC_SW1 You can overclock the FSB to increase the processor frequency by changing this switch. Follow the instructions below to set the FSB. (default) 200 -> 266 MHz 200 -> 333 MHz 266 -> 333 MHz 200 -> 400 MHz 266 -> 400 MHz 333 -> 400 MHz
  • MSI P43T | User Guide - Page 37
    MS-7519 Slots PCIE (Peripheral Component Interconnect Express) Slot The PCI Express slot supports the PCI Express interface expansion card. PCI Express x16 Slot PCI Express x1 Slot Important When adding or removing expansion cards, make sure that you
  • MSI P43T | User Guide - Page 38
    ▍ Hardware Setup PCI (Peripheral Component Interconnect) Slot The PCI slot supports LAN card, SCSI card, USB card, and other add-on cards that comply with PCI specifications. 32-bit PCI Slot Important When adding or removing expansion cards, make sure that you unplug the power supply first.
  • MSI P43T | User Guide - Page 39
    LED Status Indicators MS-7519 CPU Phase LEDs: LED1, LED2, LED3 These LEDs indicate the current CPU power phase mode. Follow the instructions below to read. Blue light Off LED1 LED2 LED3 Mode CPU is in 1 phase power mode. CPU is in 3 phase power mode. 2-23
  • MSI P43T | User Guide - Page 40
    Chapter 3 BIOS Setup This chapter provides information on the BIOS Setup program and allows you to configure the system for optimum use. You may need to run the Setup program when: ■ An error message appears on the screen during the system booting up, and requests you to run SETUP. ■ You want to
  • MSI P43T | User Guide - Page 41
    AWARD, and P = PHOENIX. 2nd - 5th digit refers to the model number. 6th digit refers to the chipset as I = Intel, N = NVIDIA, A = AMD and V = VIA. 7th - 8th digit refers to the customer as MS = all standard customers. V1.4 refers to the BIOS version. 051509 refers to the date this BIOS was released
  • MSI P43T | User Guide - Page 42
    MS-7519 Control Keys Move to the previous item Move to the next item Move to the item in the left hand Move to the item in
  • MSI P43T | User Guide - Page 43
    ▍ BIOS Setup The Main Menu ▶ Standard CMOS Features Use this menu for basic system configurations, such as time, date etc. ▶ Advanced BIOS Features Use this menu to setup the items of the BIOS special enhanced features. ▶ Integrated Peripherals Use this menu to specify your settings for integrated
  • MSI P43T | User Guide - Page 44
    MS-7519 ▶ M-Flash Use this menu to read/ flash (or backup) the BIOS from (to) storage . ▶ Load Optimized Defaults Use this menu to load the default values set by the mainboard manufacturer specifically for optimal performance of the mainboard. ▶ Save & Exit Setup Save changes to CMOS and exit setup
  • MSI P43T | User Guide - Page 45
    ▍ BIOS Setup Standard CMOS Features The items in Standard CMOS Features Menu include some basic setup items. Use the arrow keys to highlight the item and then use the or keys to select the value you want in each item. ▶ Date (MM:DD:YY) This allows you to set the system to the date
  • MSI P43T | User Guide - Page 46
    MS-7519 ▶ IDE Primary Master/ Slave & SATA1~6 Press to enter the sub-menu, and the following screen appears. ▶ Device / Vendor / Size It will show the device
  • MSI P43T | User Guide - Page 47
    Booting Setting the item to [Enabled] allows the system to boot within 10 seconds since it will skip some check items. ▶ Boot Up Num-Lock LED This setting is to set the Num Lock status when the system is powered on. Setting to [On] will turn on the Num Lock key
  • MSI P43T | User Guide - Page 48
    MS-7519 ▶ IOAPIC Function This field is used to enable or disable the APIC (Advanced Programmable Interrupt Controller). Due to compliance with PC2001 design guide Specification) version to be used for the operating system. You need to select the MPS version supported Bit Support Intel's Execute Disable
  • MSI P43T | User Guide - Page 49
    the system fails to boot from 1st boot device. ▶ Trusted Computing Press to enter the sub-menu and the following screen appears: ▶ TCG/TPM SUPPORT Setting the option to [Yes] enables TPM (Trusted Platform Module) to the system. ▶ Clearing the TPM Press Enter to clear the TPM status. 3-10
  • MSI P43T | User Guide - Page 50
    Integrated Peripherals MS-7519 ▶ USB Controller This setting allows you to enable/disable the onboard USB controller. ▶ USB Device Legacy Support Select [Enabled] if you need to use a USB-interfaced device in the operating system. ▶ Onboard LAN Controller This setting allows you to enable/disable
  • MSI P43T | User Guide - Page 51
    ▍ BIOS Setup ▶ On-Chip ATA Devices Press to enter the sub-menu and the following screen appears: ▶ PCI IDE BusMaster This item allows you to enable/ disable BIOS to used PCI busmastering for reading/ writing to IDE drives. ▶ On-Chip SATA Controller This item allows users to enable or disable
  • MSI P43T | User Guide - Page 52
    Power Management Setup MS-7519 Important S3-related functions described in this section are available only when the BIOS supports S3 sleep mode. ▶ ACPI Function This item is to activate the ACPI (Advanced Configuration and Power Management Interface) Function. If your operating system is ACPI-
  • MSI P43T | User Guide - Page 53
    ▍ BIOS Setup ▶ Power Button Function This feature sets the function of the power button. Settings are: [Power On/Off] The power button functions as normal power on/ off button. [Suspend] When you press the power button, the computer enters the suspend/ sleep mode, but if the button is pressed
  • MSI P43T | User Guide - Page 54
    H/W Monitor MS-7519 ▶ Chassis Intrusion The field enables or disables the feature of recording can control the CPU fan speed automatically depending on the current temperature to keep it with in a specific range. You can enable a fan target value here. If the current CPU fan temperature reaches to
  • MSI P43T | User Guide - Page 55
    ▍ BIOS Setup Green Powr ▶ CPU Phase Control When set to [Auto], the hardware will auto adjust the CPU power phase according to the loading of CPU to reach the best power saving function. ▶ LED Power Control This item is used to enable/ disable the power phase LEDs of the mainboard. 3-16
  • MSI P43T | User Guide - Page 56
    MS-7519 BIOS Setting Password When you select this function, a message as below will appear on the screen: Type the password, up to six characters in length,
  • MSI P43T | User Guide - Page 57
    only if you are familiar with the chipset. ▶ Current CPU / DRAM Frequency These items show the current frequencies of CPU and Memory. Read-only. ▶ CPU Specifications Press to enter the sub-menu and the following screen appears. This submenu shows the information of installed CPU. 3-18
  • MSI P43T | User Guide - Page 58
    MS-7519 ▶ CPU Technology Support Press to enter the sub-menu. This sub-menu shows the technologies that the installed CPU supported. ▶ D.O.T. Control D.O.T. (Dynamic Overclocking Technology) is an automatic overclocking function, included in the MSI™ newly developed Dual Core Center™
  • MSI P43T | User Guide - Page 59
    you to select the DDR timing setting. Setting to [Auto] enables memory clock automatically to be determined by SPD. Selecting [Manual] allows users to configure these fields manually. ▶ FSB/DRAM Ratio This item will allow you to adjust the ratio of FSB to memory. ▶ Adjusted DRAM Frequency (MHz
  • MSI P43T | User Guide - Page 60
    MS-7519 ▶ Spread Spectrum When the mainboard's clock generator pulses, the extreme values (spikes) of the pulses cause your overclocked processor to lock up. Important • If you do not have any EMI problem, leave the setting at [Disabled] for optimal system stability and performance. But if you are
  • MSI P43T | User Guide - Page 61
    from selected file, which was be download from official website and must be saved in the root directory of the USB/ Storage drive. It only supports particular file name, which is the official BIOS file name from us. [Boot] After allocated particular BIOS file, system will boot from this BIOS
  • MSI P43T | User Guide - Page 62
    Important • Please refer to the block diagram below about the M-Flash function. MS-7519 • Due to the special design of some graphics cards will cause dark screen during Mflash operation, and you may refer the beeps from the system to confirm the current M-flash process. 3-23
  • MSI P43T | User Guide - Page 63
    BIOS ROM chip data. Note: it only supports FAT/ FAT32 file system drive. ▶ Save File Name as Please setup a specific name for the BIOS file, which will name as the default name. ▶ Save Extend File name as Please setup a specific extend name for the BIOS file, which will be saved into the USB drive/
  • MSI P43T | User Guide - Page 64
    MS-7519 Load Fail-Safe/ Optimized Defaults The two options on the main menu allow users to restore all of the BIOS settings to the default Fail-Safe or Optimized values. The Optimized Defaults are the default values set by the mainboard manufacturer specifically for optimal performance of the
  • MSI P43T | User Guide - Page 65
  • MSI P43T | User Guide - Page 66
    Appendix A Realtek Audio The Realtek audio provides 10-channel DAC that simultaneously supports 7.1 sound playback and 2 channels of independent stereo sound output (multiple streaming) through the Front-Out-Left and Front-Out-Right channels. A-A-1
  • MSI P43T | User Guide - Page 67
    / Vista For Windows® XP, you must install Windows® XP Service Pack3 or later before installing the driver. The following illustrations are based on Windows® XP environment and could look slightly different if you install the drivers in different operating systems. 1. Insert the application DVD into
  • MSI P43T | User Guide - Page 68
    3. Click Next to install the Realtek High Definition Audio Driver. MS-7519 4. Click Finish to restart the system. Click here Select this option Click here Click here A-3
  • MSI P43T | User Guide - Page 69
    ▍ Realtek Audio Software Configuration After installing the audio driver, you are able to use the 2-, 4-, 6- or 8- channel audio feature now. the HD Audio Configuration. It is also available to enable the audio driver by clicking the Realtek HD Audio Manager from the Control Panel. Double click A-4
  • MSI P43T | User Guide - Page 70
    Sound Effect Here you can select a sound effect you like from the Environment list. MS-7519 ■ Environment Simulation You will be able to enjoy different sound experience by pulling down the arrow, totally 23 kinds of sound effect will be shown
  • MSI P43T | User Guide - Page 71
    ▍ Realtek Audio ■ Equalizer Selection Equalizer frees users from default settings; users may create their owned preferred settings by utilizing this tool. 10 bands of equalizer, ranging from 100Hz to 16KHz. Save The settings are saved permanently for future use Reset 10 bands of equalizer would go
  • MSI P43T | User Guide - Page 72
    MS-7519 Frequently Used Equalizer Setting Realtek recognizes the needs that you might have. By leveraging our long experience at audio field, Realtek HD Audio Sound Manager
  • MSI P43T | User Guide - Page 73
    Audio front output item will appear after you pluging the speakers into the jacks on the front panel. ■ Multi-Stream Function Realtek audio supports an outstanding feature called Multi-Stream, which means you may play different audio sources simultaneously and let them output respectively from the
  • MSI P43T | User Guide - Page 74
    MS-7519 When you are playing the first audio source (for example: use Windows Media Player to play DVD/VCD), the output will be played from the
  • MSI P43T | User Guide - Page 75
    ▍ Realtek Audio ■ Playback control Tool Mute Playback device This function is to let you freely decide which ports to output the sound. And this is essential when multistreaming playback enabled. - Realtek HD Audio Rear Output - Realtek HD Audio Front Output Mute You may choose to mute single or
  • MSI P43T | User Guide - Page 76
    ■ Recording control MS-7519 Tool Mute Recording device -Back Line in/ Mic, Front Lin in -Realtek HD Audio Input Mute You may choose to mute single or multiple volume
  • MSI P43T | User Guide - Page 77
    to find the icon beside the jack changed to the one that is same as your device. - If not correct, Realtek HD Audio Manager will guide you to plug the device into the correct jack. A-12
  • MSI P43T | User Guide - Page 78
    ■ Connector Settings Click to access connector settings. MS-7519 Disable front panel jack detection (optional) Jack detection function only works with HD audio front panel. Please check if front jacks on your system are
  • MSI P43T | User Guide - Page 79
    ▍ Realtek Audio ■ S/PDIF Short for Sony/Philips Digital Interface, a standard audio file transfer format. S/PDIF allows the transfer of digital audio signals from one device to another without having to be converted first to an analog format. Maintaining the viability of a digital signal prevents
  • MSI P43T | User Guide - Page 80
    MS-7519 ■ Test Speakers You can select the speaker by clicking it to test its functionality. The one you select will light up and make testing sound.
  • MSI P43T | User Guide - Page 81
    ▍ Realtek Audio Microphone In this tab you may set the function of the microphone. Select the Noise Suppression to remove the possible noise during recording, or select Acoustic Echo Cancellation to cancel the acoustic echo during recording. Acoustic Echo Cancellation prevents playback sound from
  • MSI P43T | User Guide - Page 82
    MS-7519 3D Audio Demo In this tab you may adjust your 3D positional audio before playing 3D audio applications like gaming. You may also select different environment to choose the most suitable environment you like. A-17
  • MSI P43T | User Guide - Page 83
    ▍ Realtek Audio Information In this tab it provides some information about this HD Audio Configuration utility, including Audio Driver Version, DirectX Version, Audio Controller & Audio Codec. You may also select the language of this utility by choosing from the Language list. Also there is a
  • MSI P43T | User Guide - Page 84
    MS-7519 Hardware Setup Connecting the Speakers When you have set the Multi-Channel Audio Function mode properly in the software utility, connect your speakers to the
  • MSI P43T | User Guide - Page 85
    ▍ Realtek Audio ■ 4-Channel Mode for Stereo-Speaker Output 1] Line In 2] Line Out (Front channels) 3] MIC 4] Line Out (Rear channels) 5] No function 6] No function A-20
  • MSI P43T | User Guide - Page 86
    ■ 6-Channel Mode for Stereo-Speaker Output MS-7519 1] Line In 2] Line Out (Front channels) 3] MIC 4] Line Out (Rear channels) 5] Line Out (Center and Subwoofer channel) 6] No function A-21
  • MSI P43T | User Guide - Page 87
    Subwoofer channel) 6] Line Out (Side channels) Important To enable 7.1 channel audio-out function on Windows Vista operating system, you have to install the Realtek Audio Driver. Or, the mainboard will support 5.1 channel audio-out only. A-22
  • MSI P43T | User Guide - Page 88
    much research and efforts to develop, helps users to monitor or configure the hardware status of MSI Mainboard in windows, such as CPU clock, voltage, fan speed and temperature. Before you install the Overclocking Center, please make sure the system has meet
  • MSI P43T | User Guide - Page 89
    Center Once you have your Overclocking Center installed (locate the setup source file in the setup CD accompanying with your mainboard, path: Utility --> MSI Utility --> Overclocking Center), it will have a short cut icon on the desktop, and a short cut path in your "Start-up" menu. You may
  • MSI P43T | User Guide - Page 90
    MS-7519 System Info In the System Info screen, you can read the information of mainboard. Motherboard Click Motherboard to read the informations of mainboard, mainboard BIOS, installed CPU and installed graphics card. Important The pictures in this appendix are for reference only and
  • MSI P43T | User Guide - Page 91
    ▍ Overclocking Center DOT Click DOT to enter the DOT screen. In DOT, you can select the basic setting to reach optimal performance in Basic menu or you can adjust advanced values for overclocking in Advance menu. Basic In the Basic menu, it provides one default setting and four common settings for
  • MSI P43T | User Guide - Page 92
    MS-7519 Advance In the Advance menu, you can adjust the values for each environment setting/ default setting. Click the Cooling/ Silence/ Default/ Game/ Cinema button to enter it's setting menu. Please refer to the following descriptions to adjust the values and save them. B-5
  • MSI P43T | User Guide - Page 93
    ▍ Overclocking Center In each setting menu, you can select desired values for manual overclocking. Simply click the right side of the button which arranges an arrow sign, and a drop-down menu will appear below the button, then select a
  • MSI P43T | User Guide - Page 94
    MS-7519 After you adjust the values in setting menu, you can save it for future use. Click the Save button, and enter a name in the empty
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
±
P45T-C53/ P45T-C51/
P45T-C41/ P43T-C53/
P43T-C51/ P43T-C41
ser±es
MS-7519 (v1.x) Ma±nboard
G52-75191XB