MSI P7N SLI-FI User Guide - Page 29
Fan Power Connectors: CPUFAN1, SYSFAN1, SYSFAN2, SYSFAN3, SPDIF-Out Connector: JSPDIF - cpu support
UPC - 816909045000
View all MSI P7N SLI-FI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Hardware Setup Fan Power Connectors: CPUFAN1, SYSFAN1, SYSFAN2, SYSFAN3 The fan power connectors support system cooling fan with +12V. W hen connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. CONTROL SENSOR +12V GND CPUFAN1 GND +12V NC SYSFAN1 NC +12V GND SYSFAN2/3 Important 1. Please refer to the recommended CPU fans at processor's official website or consult the vendors for proper CPU cooling fan. 2. CPUFAN1 supports fan control. You can install Dual Core Center utility that will automatically control the CPU fan speed according to the actual CPU temperature. 3. Fan/heatsink with 3 or 4 pins are both available for CPUFAN1. SPDIF-Out Connector: JSPDIF This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format) interface for digital audio transmission. JSPDIF VCC SPDIF GND S/PDIF Bracket (Optional) 2-15