MSI Z170A PC MATE User Manual - Page 44
Super IO Configuration, Serial COM Port 0 Settings [Auto]
View all MSI Z170A PC MATE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
▶▶Super IO Configuration Sets system Super I/O chip parameters including LPT and COM ports. Press to enter the sub-menu. ▶▶Serial (COM) Port 0 Configuration Sets detailed configuration of serial(COM) port x. Press to enter the submenu. ▶▶Serial (COM) Port 0 [Enabled] Enables or disables serial (COM) port x. ▶▶Serial (COM) Port 0 Settings [Auto] Sets serial port x (COM). If set to Auto, BIOS will optimize the IRQ automatically or you can set it manually. ▶▶Parallel (LPT) Port Configuration Sets detailed configuration of parallel port (LPT). Press to enter the submenu. ▶▶Parallel (LPT) Port [Enabled] Enables or disables parallel(LPT) port. ▶▶Parallel (LPT) Port Settings [Auto] Sets parallel port (LPT). If set to Auto, BIOS will optimize the IRQ automatically or you can set it manually. ▶▶Device Mode [STD Printer Mode] Selects an operating mode for parallel port. [STD Printer Mode] Printer port mode [SPP] Standard Parallel Port mode [EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard Parallel Port mode. [ECP] Extended Capability Port mode [ECP + EPP-1.9/ 1.7] Extended Capability Port mode + Enhanced Parallel Port-1.9/ 1.7 mode. ▶▶Power Management Setup Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press to enter the sub-menu. ▶▶EuP 2013 [Disabled] Enables or disables the system power consumption according to EuP2013 regulation. [Enabled] Optimize the system power consumption according to EuP 2013 regulation. It will not support S4 & S5 wake up by USB, PCI and PCIe devices. [Disabled] Disables this function. 44 BIOS Setup