MSI Z390-A PRO User Manual - Page 49
Serial COM Port 0 Settings [Auto], Super IO Configuration
View all MSI Z390-A PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
fIGD Multi-Monitor [Disabled] Enables or disables the multi-screen output from integrated graphics and external graphics card. This item appears when Initiate Graphic Adapter set to PEG. [Enabled] Enables multi-screen function for both integrated and external graphics cards. [Disabled] Disables this function. f Intel (R) Thunderbolt Sets the thunderbolt device function. Press Enter to enter the sub-menu. fDiscrete Thunderbolt(TM) Support [Disabled] Enables or disables the thunderbolt I/O devcie support. f USB Configuration Sets the onboard USB controller and device function. Press Enter to enter the submenu. fUSB Controller [Enabled] Enables or disables all USB controller. fXHCI Hand-off [Diasbled] Enables or disables XHCI hand-off support for the operating system without XHCI hand-off feature. fLegacy USB Support [Enabled] Sets Legacy USB function support. [Auto] The system will automatically detect if any USB device is connected and enable the legacy USB support. [Enabled] Enable the USB support under legacy mode. [Disabled] The USB devices will be unavailable under legacy mode. f Super IO Configuration Sets system Super I/O chip parameters including COM ports. Press Enter to enter the sub-menu. fSerial (COM) Port 0 Configuration Sets detailed configuration of serial(COM) port. Press Enter to enter the submenu. fSerial (COM) Port 0 [Enabled] Enables or disables serial port. fSerial (COM) Port 0 Settings [Auto] Sets serial port. If set to Auto, BIOS will optimize the IRQ automatically or you can set it manually. fParallel (LPT) Port Configuration Sets detailed configuration of parallel port (LPT). Press Enter to enter the submenu. fParallel (LPT) Port [Enabled] BIOS Setup 49