Mackie ART500 Spec Sheet - Page 2
Speaker, Art500 - art 500 9 g
View all Mackie ART500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ART500 SPEAKER ART500 Two-Way Speaker System Specifications System Acoustic Frequency Range (-10 dB): Frequency Response (-3 dB): Horz. Coverage Angle (-6 dB): Vert. Coverage Angle (-6 dB): Directivity Factor; Q (DI): System Sensitivity1: Rated Maximum Peak2: System Input Power Rating2: Recommended Amplifier3: System Nominal Impedance: HF Protection: Crossover: 50Hz-20kHz 70Hz-17kHz 80°, nominal 60°, nominal 10.7 (10.3), averaged 1kHz to 10kHz 100dB 1W @ 1m 133dB @ 1m 500 W, IEC; 2000 W Peak 700 W 8Ω Over-voltage dampening LICC 1.8kHz, 12dB/octave Transducers Low-Frequency: High-Frequency: 15" (380mm) woofer with 4" (102mm) voice coil Polynomial horn-loaded 2" (51mm) exit titanium compression driver Physical Enclosure: Gray, semi-trapezoidal, reinforced polypropylene Mounting: Six M10 metal threaded inserts, 1.375" (35mm) lockable stand mount Grille: Protective perforated steel grille Input Connectors: 2 x NL4 Speakon® connector plate Dimensions (HxWxD): 29.15" x 17.88" x 14.77" (740mm x 454mm x 375mm) Weight: 72.7 lbs. (33kg) Options ART A-8 ART A-9 ART A-10 SM Horizontal wall mount hardware Horizontal, adjusting wall mount bracket Vertical, adjusting wall mount bracket Tripod stand, black 1 Measured on axis in the far field with 1 watt (2.83 V RMS, 8Ω ) input and referenced to 1 meter distance using the inverse square law. Listed sound pressure represents an average from 300 Hz to 3 kHz. 2 IEC Spectrum, Peak for 2 hours with +6 dB crest factor. 3 Recommended Amplifier is a power capability value that should be taken as a guide. 2 OF 6 PAGES