Mackie CFX16.mkII Owner's Manual - Page 3

Introduction - mixer

Page 3 highlights

INTRODUCTION Thank you for choosing a Mackie CFX MKII mixer! These compact live-sound mixers are designed to meet the sound reinforcement needs of almost any small to medium-sized club, meeting room, sanctuary, or outdoor gathering. Here's a quick glance at all the features you've acquired: 8, 12, or 16 mono channels, with: • Variable input gain (+5 to +50 dB mic, -15 to +30 dB line) • Phantom power (globally switched) • Zero Level gain setting indicator LED • Switchable 100 Hz low-cut filter • TRS insert jack • 2 pre/post-fader aux sends • 2 post-fader effects sends • 3-band mid-sweep EQ • Pan, mute, and 1-2/3-4 busing • PFL solo • 60mm mono fader 2 stereo line channels, with: • Variable input gain (-20 to +20 dB) • 2 pre/post-fader aux sends • 2 post-fader effects sends • 4-band EQ • Pan, mute, and 1-2/3-4 busing • PFL solo • 60mm stereo fader Comprehensive master section, with: • Four 60mm submix mono faders • Separate Left and Right assign for each sub • 60mm main mix stereo fader • TRS insert jacks for main mix • Balanced XLR stereo main outputs • Balanced XLR mono subwoofer output • 12-segment stereo LED metering • Mackie's (in)famous Rude Solo Light • 9-band stereo graphic EQ (main mix) • EMAC™ 32-bit digital stereo effects with footswitch jack • 2 aux sends with master level controls • 2 effects sends with master level controls • Level controls for stereo effect returns • Break switch for 'worry-free' intermissions • RCA tape out • RCA tape in with stereo level control • Headphone output with level control • Utility out with level control • 12V BNC lamp socket ABOUT THIS MANUAL Absolutely most important page: Before you start engineering, please read the "Quick Start" section on page 5. It's a list of steps that will familiarize you with the CFX mixer and help you set up a basic performance. About those blue numbers: You'll notice numbers in blue circles, like this: . Every feature on the CFX mixer has one of these numbers assigned to it. Whenever a feature is mentioned, described or illustrated, its number will be right next to it. Please write your serial number here for future reference (i.e., insurance claims, tech support, return authorization, etc.): Purchased at: Date of purchase: Part No. SW0585 Rev. C 04/09 ©2004-2009 LOUD Technologies Inc. All Rights Reserved. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

3
INTRODUCTION
Comprehensive master section, with:
Four 60mm submix mono faders
Separate Left and Right assign for each
sub
60mm main mix stereo fader
TRS insert jacks for main mix
Balanced XLR stereo main outputs
Balanced XLR mono subwoofer output
12-segment stereo LED metering
Mackie’s (in)famous Rude Solo Light
9-band stereo graphic EQ (main mix)
EMAC™ 32-bit digital stereo effects with
footswitch jack
2 aux sends with master level controls
2 effects sends with master level controls
Level controls for stereo effect returns
Break switch for ‘worry-free’ intermissions
RCA tape out
RCA tape in with stereo level control
Headphone output with level control
Utility out with level control
12V BNC lamp socket
ABOUT THIS MANUAL
Absolutely most important page:
Before you start engineering, please read
the “Quick Start” section on page 5. It’s a list
of steps that will familiarize you with the CFX
mixer and help you set up a basic performance.
About those blue numbers:
You’ll notice numbers in blue circles, like
this:
. Every feature on the CFX mixer has
one of these numbers assigned to it. Whenever
a feature is mentioned, described or illustrated,
its number will be right next to it.
Thank you for choosing a Mackie CFX MKII
mixer! These compact live-sound mixers are
designed to meet the sound reinforcement
needs of almost any small to medium-sized
club, meeting room, sanctuary, or outdoor gath-
ering.
Here’s a quick glance at all the features
you’ve acquired:
8, 12, or 16 mono channels, with:
Variable input gain
(+5 to +50 dB mic, –15 to +30 dB line)
Phantom power (globally switched)
Zero Level gain setting indicator LED
Switchable 100 Hz low-cut filter
TRS insert jack
2 pre/post-fader aux sends
2 post-fader effects sends
3-band mid-sweep EQ
Pan, mute, and 1-2/3-4 busing
PFL solo
60mm mono fader
2 stereo line channels, with:
Variable input gain (–20 to +20 dB)
2 pre/post-fader aux sends
2 post-fader effects sends
4-band EQ
Pan, mute, and 1-2/3-4 busing
PFL solo
60mm stereo fader
Please write your serial number here for
future reference (i.e., insurance claims, tech
support, return authorization, etc.):
Purchased at:
Date of purchase:
Part No. SW0585
Rev. C
04/09
©2004-2009 LOUD Technologies Inc.
All Rights Reserved.