Mackie MR10Smk3 Owners Manual - Page 13

Owner's Manual Appendix C: Technical Information MR10Smk3 Specifications Acoustic Performance Free Field Frequency Response: 35 Hz - 180 Hz Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input: 113 dB SPL @ 1m Maximum SPL Per Pair: 119 dB SPL @ 1m Transducers Low Frequency: 10 in / 254 mm hyperbolic curved cone woofer Amplifiers Low Frequency Power: 120 watts, 4 Ω load, 240 watts peak Type: Monolithic IC, Class AB with DMOS power stage Electronic Crossover Crossover Type: 12 dB/octave Crossover Frequency: 40 Hz - 180 Hz [Adjustable] Sensitivity: +4 dBu at 65 Hz for full output Input Impedance: 20 kΩ, balanced bridging; 10 kΩ unbalanced AC Power Requirements US: Europe: Korea: Japan: 120 VAC, 60 Hz 240 VAC, 50 Hz 220 VAC, 60 Hz 100 VAC, 50/60 Hz Note: MR10Smk3 subwoofers do not support multiple voltage configurations. Make sure the voltage rating for your particular model (as indicated on the rear panel near the IEC socket) corresponds with your local AC mains voltage. AC Connector: 3-pin IEC 250 VAC, 16 A male Fuse: 115 VAC: T 2.5 AL / 250 V 230 VAC: T 1.25 mAL / 250 V Power Consumption: 250 watts with music, loud mix 13 watts quiescent (idle) Physical Dimensions and Weight Enclosure: 0.625 in / 15 mm thick MDF with 0.98 in / 25 mm MDF front panel Damping: Adiabatic batting Dimensions: Height: Width: Depth: Weight: 15 in / 381 mm 12.6 in / 320 mm 15 in / 381 mm 27.3 lb / 12.4 kg Disclaimer LOUD Technologies is always striving to improve our products by incorporating new and improved materials, components and manufacturing methods. Therefore, we reserve the right to change these specifications at any time without notice. The following are trademarks or registered trademarks of LOUD Technologies Inc.: MR Series and the Running Man. This manual also contains names and marks of other companies which belong to those respective companies, and are hereby acknowledged. ©2013 LOUD Technologies Inc. All Rights Reserved. Owner's Manual 13